Clean, clear acoustic guitar sound in amplified settings.

The A1.2 is the little brother of the classic B-Band A2 preamp and is big on classic B-Band sound. The single input A1.2 has a direct frequency response with 24 dB of gain, making a perfect fit with the B-Band UST (not included). The sound reproduction is amazingly pure and clear.

The A1.2 comes with a volume control that simply mounts at the inside edge of the sound hole with adhesive. The 9-volt-battery-powered electronics are mounted in a small tube that is directly coupled with a high quality endpin jack, making an all-in-one structure.

The structure is light in mass, adding very little weight to the instrument. Includes all mounting hardware, box-tight battery holder and wire harness.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

B-Band A1.2 Acoustic Guitar Endpin Preamp Features:

Volume control mounted at the soundhole
Can use either UST or AST (sold separately)
High quality endpin output jack
750 hours average battery life

B-Band A1.2 Acoustic Guitar Endpin Preamp Specifications:

S/N ratio: Greater than 90 dB
Distortion: 0.05%
Frequency response: 50 Hz to 40 kHz (+0, -3 dB)
Input channel voltage gain: +24 dB
Input impedance: 50 mOhms -|< 10 pF
Output impedance: < 3.5 kOhms
Nominal output level: -10 dBu (0.245 Vrms)
Power supply: 9V battery (not included)
Current consumption: 1.2 mA typical
Connections: Transducer input, 2.54mm (3/32") header; Output, 6,3mm (1/4") jack
Weight (with accessories): 50 g
Size: 13x97mm