B-52 US-1200 Power Amp  

Item #: 
1274741933623111274
  • Write a Review

The B-52 US-1200 Power Amp has low noise, low distortion circuitry, and high current output stages. B-52 uses oversized toroidial transformers and large filter capacitors to deliver super-clean, fist-... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Similar Products
Overview

The B-52 US-1200 Power Amp has low noise, low distortion circuitry, and high current output stages. B-52 uses oversized toroidial transformers and large filter capacitors to deliver super-clean, fist-pumping output even when driving 2-ohm speaker loads.

The stellar looking US-Series professional power amplifiers are made to outperform in any setting. B-52 US-series power amplifiers use the most reliable linear output devices, which provide ultralow distortion and ruler-flat frequency response. Backed by a 3-year warranty.

Features
  • Compact 2-rack size
  • High-current toroidal transformers for greater 2-ohm power
  • 21-position detent gain control knobs for consistent settings
  • Front panel LED display: Power, bridge and parallel LEDs and signal,
  • 20dB, -10dB, 0dB, clip and protect LEDs for each channel
  • Protection: short circuit, output current limiting, thermal, DC offset, turn on/off muting, RF protection and circuit breaker
  • Clip limiters reduce distortion without sacrificing peak performance (defeatable on US-3000/US-4000)
  • Sub-sonic filters protect speakers and increase headroom (defeatable)
  • Balanced combo XLR and ¼" TRS input connectors and link XLR output connectors
  • 5-Way binding post and Speakon„¢ outputs
  • Low-noise cooling fans with continuously variable speed and highly efficient front-to-rear forced air keeps the amplifiers cool
Specifications
  • Power:
    Stereo Both Channel Driven @ 1kHz, 1%THD
    8 Ohms: 210 watts
    4 Ohms: 330 watts
    2 Ohms: 430 watts

    Bridged Mono @ 1kHz, 1%THD
    8 Ohms: 650 watts
    4 Ohms: 850 watts

    Input Sensitivity: 1.23 Vrms (+4 dBu) for full power @ 4 Ohms
    Input Impedance: 30K ohms Balanced/15K ohms Unbalanced
    Frequency Response: 0/-0.5dB: 20Hz - 20kHz; 0/-3dB: 5Hz - 60kHz
    Signal to Noise Ratio: Better than 100dB (20Hz - 20kHz)
    Distortion (SMPTE-IM): Less than 0.03%
    Output Circuitry: AB
    Cooling: Continuously variable speed fan, front to rear
    Protection: Short circuit, thermal, current limit, dc offset, AC current inrush, RF protection, subsonic, turn on/off muting
    Connectors:
    Input: Combo female XLR & 1/4" TRS jack. Link: Male XLR
    Output: Both 5-way biding post and Speakon„¢
    Controls:
    Front: Power on/off switch, volume controls for each channel
    Rear: Mode switch (stereo / parallel / bridge), HPF on/off, Limiter on/off (US3000/4000)
    Indicator: Power, parallel, bridge. Each channel: Signal, -20dB, -10dB, clip, protect
    Power Requirements: 115/230V 60/50Hz factory configured
    AC consumption: Both channels driven at 4 Ohm load, at 115Vac (for 230V divide by 2)
    Controls: Front: Power on/off switch, volume controls for each channel
    Typical level, 1/8 power pink noise: 4.5A
    Severe level, 1/3 power pink noise: 7A
    Dimensions: 19" (482mm) x 3.5" (88mm) x 17.2" (438mm)
    Net weight: 28lb (13kg)
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.