Item # 105791560 | Customer Ratings: ( 5 Based on 1 reviews)

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
B-52 US-3000 Power Amplifier
Use Add to Cart below to have it shipped to you, or to a store near you.
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store

Designed to provide outstanding performance.

The B-52 US-3000 Power Amplifier features low-noise, low-distortion circuitry and high-current output stages, toroidal transformers, and large filter capacitors to deliver super-clean, fist-pumping output even when driving 2-ohm speaker loads. Its highly reliable linear output devices provide ultra-low distortion and ruler flat frequency response. Backed by a 3-year warranty.

B-52 US-3000 Power Amplifier Features:

  • Compact 2-rack size
    High-current toroidal transformers for greater 2-ohm power
    21-position detent gain control knobs for consistent settings
    Front panel LED display: Power, bridge and parallel LEDs and signal,
    20dB, -10dB, 0dB, clip and protect LEDs for each channel
    Protection: short circuit, output current limiting, thermal, DC offset, turn on/off muting, RF protection and circuit breaker
    Clip limiters reduce distortion without sacrificing peak performance (defeatable on US-3000/US-4000)
    Sub-sonic filters protect speakers and increase headroom (defeatable)
    Balanced combo XLR and ¼" TRS input connectors and link XLR output connectors
    5-Way binding post and Speakon™ outputs
    Low-noise cooling fans with continuously variable speed and highly efficient front-to-rear forced air keeps the amplifiers cool

B-52 US-3000 Power Amplifier Specifications:

  • Power:
    Stereo Both Channel Driven @ 1kHz, 1%THD
    8 Ohms: 500 watts
    4 Ohms: 800 watts
    2 Ohms: 1200 watts

    Bridged Mono @ 1kHz, 1%THD
    8 Ohms: 1600 watts
    4 Ohms: 2400 watts

    Input Sensitivity: 1.23 Vrms (+4 dBu) for full power @ 4 Ohms
    Input Impedance: 30K ohms Balanced/15K ohms Unbalanced
    Frequency Response: 0/-0.5dB: 20Hz - 20kHz; 0/-3dB: 5Hz - 60kHz
    Signal to Noise Ratio: Better than 100dB (20Hz - 20kHz)
    Distortion (SMPTE-IM): Less than 0.03%
    Output Circuitry: H
    Cooling: Continuously variable speed fan, front to rear
    Protection: Short circuit, thermal, current limit, dc offset, AC current inrush, RF protection, subsonic, turn on/off muting
    Input: Combo female XLR & 1/4" TRS jack. Link: Male XLR
    Output: Both 5-way biding post and Speakon™
    Front: Power on/off switch, volume controls for each channel
    Rear: Mode switch (stereo / parallel / bridge), HPF on/off, Limiter on/off (US3000/4000)
    Indicator: Power, parallel, bridge. Each channel: Signal, -20dB, -10dB, clip, protect
    Power Requirements: 115/230V 60/50Hz factory configured
    AC consumption: Both channels driven at 4 Ohm load, at 115Vac (for 230V divide by 2)
    Controls: Front: Power on/off switch, volume controls for each channel
    Typical level, 1/8 power pink noise: 7A
    Severe level, 1/3 power pink noise: 14.8A
    Dimensions: 19" (482mm) x 3.5" (88mm) x 17.2" (438mm)
    Net weight: 43lb (19kg)

Product Reviews
(Based on 1 reviews)
Sort reviews:
Viewing Reviews 1 - 1 of 1

    As reviewed by DJ Matty on 1/2/2010

    This amp is great. i use it for my JBL JRX100s and it sounds perfect. The lights on it really give it a cool look and the design really finishes it off. the only bad thing is it is really heavy. but that can be fixed. Overall this amp i would buy again if i got more speakers.

    5 of 6 people found this review helpful.
    Was this review helpful?
Questions about the US-3000 Power Amplifier (105791560)

PO Box 4769
Westlake Village, CA 91359
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
Click to add file attachment
File Upload 5mb limit