The Aviom AN-16/i-M input module features 16 high quality mic preamps and converts 16 mic- or line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio transmitted via A-... Click To Read More About This Product
The Aviom AN-16/i-M input module features 16 high quality mic preamps and converts 16 mic- or line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio transmitted via A-Net. The AN-16/i-M can be used as the head end for a Pro16 Monitor Mixing System, as a standalone mic pre, or in digital snake applications. With the AN-16/i-M, Aviom delivers the lowest cost-per-channel high performance mic pre available today!
Each input channel includes a three-segment level meter, a continuously variable gain control knob, a phase reverse switch, 48-volt phantom power, and a rumble filter with an 85Hz rolloff. In addition, each pair of channels can be Stereo Linked for stereo operation in a Pro16 Monitor Mixing System.
The rear panel of the AN-16/i-M contains a host of professional connectivity features. Each channel has a combo jack that can accept either XLR mic or 1/4-inch line-level (balanced or unbalanced) inputs. Sixteen passive XLR Thru connectors split each input channel. Balanced insert points with separate 1/4-inch Send and Return jacks allow easy interfacing with external processing and effects devices. The sixteen insert Sends can also be used as a set of post-gain direct outs.
Two parallel A-Net outputs allow the AN-16/i-M to send A-Net data to multiple destinations, allowing for simultaneous patching to a monitor console and a front-of-house console. Both A-Net outputs feature heavy duty Neutrik EtherCon connectors. The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations.
Sixteen high quality mic preamps, with 24-bit A/D converters
XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
48-volt phantom power on each channel
Three-segment LED level meter for each channel
Continuously variable gain control for each channel
Phase reverse switch per channel
Rumble filter switch (85Hz rolloff) on each channel
Stereo Link switch per pair of channels
Built-in passive splitter
Balanced insert send and return jacks (1/4-inch TRS)
Dual A-Net outputs
A-Net Expansion jack for 32x0 and 16x16 channel systems
Input: XLR, TRS; Combo Jack
Insert Send/ Return: Connector: TRS, Signal; Impedance Balanced, Nominal Level; 0 dBu; A-Net Output: one Category 5 (RJ45 connector); A-Net Expansion: one Category 5 (RJ45 connector)
Mic: +6dB to +60dB, variable
Line: -15dB to +36dB, variable
Input Impedance: Mic: 2.4 ohms, Line (TRS): 33k ohms, Insert Return: 39k ohms
Low Cut Filter: -3dB @85Hz, -18dB per octave
Phantom Power: +48 volts, per channel
A/D Converters: 24 bit
Digital Outputs: A-Net: 2 (Main and Aux), A-Net Expansion: 1
Power Supply: Internal, universal switching type; standard IEC cable provided
Voltage: 100-240VAC, 50-60Hz, 60W
Dimensions: 19" wide x 9.25" deep x 5.25" high (3U)
Weight: 12 lbs.
GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.