Aviom 16x16 Digital Snake Package  

Item #: 
13010350245796890
  • Write a Review

The Aviom 16x16 Digital Snake Package includes the Aviom AN-16/i-M 16-Channel Mic and Line Level Input Module, Aviom AN-16/i 16-Channel Input Module, 2 Aviom AN-16/o 16-Channel Output Modules, and a A... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Aviom 16x16 Digital Snake Package includes the Aviom AN-16/i-M 16-Channel Mic and Line Level Input Module, Aviom AN-16/i 16-Channel Input Module, 2 Aviom AN-16/o 16-Channel Output Modules, and a Aviom L-100 Layflat Cat-5e 100' Cable. The Aviom Pro16 Series defines the industry standard for Personal Monitor Mixing and streaming audio over Cat-5. Pro16 Series products deliver perfect monitor mixes and economical digital audio distribution.

AN-16/i-M 16-Channel Mic and Line Level Input Module

The Aviom AN-16/i-M features 16 high quality mic preamps and converts 16 mic- or line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio transmitted via A-Net. The AN-16/i-M can be used as the head end for a Pro16 Monitor Mixing System, as a standalone mic pre, or in digital snake applications. With the AN-16/i-M, Aviom delivers the lowest cost-per-channel high performance mic pre available today!

Each input channel includes a three-segment level meter, a continuously variable gain control knob, a phase reverse switch, 48-volt phantom power, and a rumble filter with an 85Hz rolloff. In addition, each pair of channels can be Stereo Linked for stereo operation in a Pro16 Monitor Mixing System.

The rear panel of the AN-16/i-M contains a host of professional connectivity features. Each channel has a combo jack that can accept either XLR mic or 1/4-inch line-level (balanced or unbalanced) inputs. Sixteen passive XLR Thru connectors split each input channel. Balanced insert points with separate 1/4-inch Send and Return jacks allow easy interfacing with external processing and effects devices. The sixteen insert Sends can also be used as a set of post-gain direct outs.

Two parallel A-Net outputs allow the AN-16/i-M to send A-Net data to multiple destinations, allowing for simultaneous patching to a monitor console and a front-of-house console. Both A-Net outputs feature heavy duty Neutrik EtherCon connectors. The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations.

AN-16/i 16-Channel Input Module

The Aviom AN-16/i converts 16 balanced line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio transmitted via A-Net. Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor Mixing System. Used in conjunction with the AN-16/o Output Module, the AN-16/i can also be used in a digital snake as an input path for main return signals from front-of-house.

The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital (48kHz, 24 bits, no compression) and transmitted in real time via A-Net, up to 500 feet over a Cat-5e cable. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path.

In most uses, audio from a console--any combination of channel inserts, direct outs, submixes, auxes, or groups--is connected to the input channels on the AN-16/i. The A-Net Out on the AN-16/i is connected to the A-Net In of a Pro16 Personal Mixer (such as the A-16II) or an A-Net Distributor.

The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations up to 32x32, 48x16, or 64x0.

AN-16/o 16-Channel Output Module

The Aviom AN-16/o converts 16 channels of uncompressed, 24-bit digital audio received via A-Net into sixteen mic- or line-level analog audio channels. The AN-16/o is perfect for connecting your Aviom digital snake to mixing consoles, amps, processors, or recorders.

Analog audio connections on the AN-16/o use secure professional grade DB25 multipin connectors, and D/A conversion runs at 48kHz/24 bits, with no compression. With selectable mic- or line-level outputs, the AN-16/o can be easily connected to virtually any gear in your rig.

To build an Aviom digital snake, combine 16-channel input and output modules as needed, up to a total of 64 channels. Every block of 16 channels requires one input module (like the AN-16/i-M for mic- and line-level sources) and one AN-16/o. With a single Cat-5e cable carrying up to 64 channels between stage and FOH or from the live room to the control room, you can move a lot of professional quality digital audio.

The system is entirely plug-and-play, so you can start enjoying the benefits of digital signal transport in no time. No ground loops or hum to track down, no bad lines to troubleshoot, no 40-lb spool of cable to lug around. Add Aviom's PB28 Modular Patch Bay to your rig to allow even faster connections between your snake and your gear.

The system is infinitely expandable, so if you want to get your audio to a recorder or monitor desk in addition to the main console, all you have to do is run another cable and connect some more output modules. Once your audio is converted to digital, you can have as many copies as you want, without any loss or signal degradation.

The built-in A-Net Expansion jack allows 32 channels to be carried on a single Cat-5e cable, without any additional hardware. Build a simple 16x16 snake, or add an Aviom monitor system to your 16-channel digital snake, all on a single cable.

The AN-16/o is also fully compatible with the AN-16SBR System Bridge, which supports 64-channel systems in a variety of bi-directional configurations. All network connections on the AN-16/o use heavy duty locking Neutrik EtherCon connectors.

Aviom L-100 Layflat Cat-5e 100' Cable

The premium quality Cat-5e cable features standard RJ45 connectors with protective rubber jackets. Cables used with A-Net products are standard Category 5e network cables.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

Features
  • AN-16/i-M 16-Channel Mic and Line Level Input Module
  • Sixteen high quality mic preamps, with 24-bit A/D converters
  • XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
  • 48-volt phantom power on each channel
  • Three-segment LED level meter for each channel
  • Continuously variable gain control for each channel
  • Phase reverse switch per channel
  • Rumble filter switch (85Hz rolloff) on each channel
  • Stereo Link switch per pair of channels
  • Built-in passive splitter
  • Balanced insert send and return jacks (1/4-inch TRS)
  • Dual A-Net outputs
  • A-Net Expansion jack for 32x0 and 16x16 channel systems
  • AN-16/i 16-Channel Input Module
  • Sixteen balanced audio inputs (TRS connectors)
  • Sixteen balanced Thru connectors (TRS)
  • A-Net Out and A-Net Expansion digital audio network connections (Cat-5)
  • Stereo Link switches for each channel pair
  • AN-16/o 16-Channel Output Module
  • Sixteen balanced audio outputs with DB25 multipin connectors
  • A-Net In, A-Net Out, and A-Net Expansion network connections
  • Two-position output level switch per channel pair (mic level or line level)
  • Signal and Clip LEDs
  • Heavy duty locking Neutrik EtherCon connectors
Specifications
  • AN-16/i-M 16-Channel Mic and Line Level Input Module
    Input: XLR, TRS; Combo Jack
    Insert Send/ Return: Connector: TRS, Signal; Impedance Balanced, Nominal Level; 0 dBu; A-Net Output: one Category 5 (RJ45 connector); A-Net Expansion: one Category 5 (RJ45 connector)
    Gain Range:
    Mic: +6dB to +60dB, variable
    Line: -15dB to +36dB, variable
    Input Impedance: Mic: 2.4 ohms, Line (TRS): 33k ohms, Insert Return: 39k ohms
    Low Cut Filter: -3dB @85Hz, -18dB per octave
    Phantom Power: +48 volts, per channel
    A/D Converters: 24 bit
    Digital Outputs: A-Net: 2 (Main and Aux), A-Net Expansion: 1
    Power Supply: Internal, universal switching type; standard IEC cable provided
    Voltage: 100-240VAC, 50-60Hz, 60W
    Dimensions: 19" wide x 9.25" deep x 5.25" high (3U)
    Weight: 12 lbs.

    AN-16/i 16-Channel Input Module
    Analog to Digital Conversion: 48kHz sample rate, 24 bit
    Frequency Response: 4Hz-22kHz
    A-Net Output: one Category 5 (RJ45 connector)
    A-Net Expansion: one Category 5 (RJ45 connector)
    Gain Switch: Four Position, -10dBv, 0dBu, +4dBu and +22dBu
    Channel LED Indicators: Signal Present and Clip, per channel
    Line Input Impedance: 48k ohms
    Power: 18-24 VDC, 500mA
    Dimensions: 19" wide x 6.7" deep x 1.75" high (1U)
    Weight: 6.8 lbs.

    AN-16/o 16-Channel Output Module
    Digital to Analog Conversion Bit Depth: 24 bit
    A-Net Input: 1 Ethercon RJ45 connector
    A-Net Output: 1 Ethercon RJ45 connector
    A-Net Expansion: 1 Ethercon RJ45 connector
    Outputs: 2 DB25 multipin connectors
    Peak Outputs Level: Selectable: +4dBu or -17dBu
    Channel LED Indicators: Signal Present and Clip per Channel
    LED Indicators: A-Net Active
    Power: 18-24 VDC, 500mA
    Dimensions: 19" wide x 6.7" deep x 1U high
    Weight: 6.5 lbs.
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.