3 days left for two-day holiday shipping

Item # 103807020

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Aviom A-16D Pro A-Net Distributor and DC Power Source
Use Add to Cart below to have it shipped to you, or to a store near you.
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store
GC Shopping Cart
 Cart Contents
Qty Description Price Shipping Subtotal 
      Aviom A-16D Pro A-Net Distributor and DC Power Source (103807020)

Eliminate the need to daisy chain Aviom Personal Mixers and connect separate power supplies.

The Aviom A-16D Pro accepts one Pro16 A-Net input signal (typically from an Input Module, such as the AN-16/i) and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro distributor provides isolated (floating ground) DC power through the eight A-Net Outs; the ninth output is an unpowered A-Net Thru connector, designed for distributing a copy of the A-Net signal to a second A-Net Distributor or remote location.

The A-16D Pro eliminates the need to daisy chain Personal Mixers, and simplifies set-up by eliminating the need to connect a power supply to each mixer. Inside the A-16D Pro is Aviom's unique power sub-system design, which requires no external power supplies and which virtually eliminates the possibility of introducing hum or ground loops. The A-16D Pro can also be used as a central hub in an audio distribution system or snake, providing outputs to multiple locations or redundant outputs to a single location.

All connections on the A-16D Pro are on the front panel. A pass-through cable cutout is provided for flexible cable routing. As with all Pro16 Series products, Cat-5e cable runs can be up to 500 ft.

Aviom A-16D Pro A-Net Distributor and DC Power Source Features:

  • One A-Net input, eight powered A-Net outputs
    A-Net Thru for system expansion (passive A-Net output)
    Isolated DC power supplies for eight A-Net Personal Mixers via the Cat-5e cable
    Standard IEC power connection
    EtherCon connections throughout
    Multiple A-Net Distributors can be used in a system

Aviom A-16D Pro A-Net Distributor and DC Power Source Specifications:

  • A-Net Input: One EtherCon RJ45 connector
    A-Net Thru: One EtherCon RJ45 connector, unpowered
    A-Net Outputs: 8 EtherCon RJ45 connectors, powered (DC)
    LEDs: Power On; A-Net Active
    Pro16 A-Net: 16 channels of digital audio over Cat-5e cable uses unshielded Cat-5e UTP (or better) cable
    Power Supply: Internal, universal switching type
    Input Voltage: 100-240VAC, 50-60Hz, 60W
    Output Voltage for Personal Mixers: 18-24 VDC, 0.5 amp transmitted over the Cat-5e cable
    Dimensions: 19" (482.6 mm) wide x 14.25" (362 mm) deep x 2U, 3.5" (88.9 mm) high
    Weight: 12.0 lbs (5.44 kilo)

Voice your opinion! Be the first to review »
Questions about the A-16D Pro A-Net Distributor and DC Power Source (103807020)

To: GuitarCenter.com
PO Box 4769
Westlake Village, CA 91359
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
Click to add file attachment
File Upload 5mb limit