- AN-16/i-M 16-Channel Mic and Line Level Input Module
- Sixteen high quality mic preamps, with 24-bit A/D converters
- XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
- 48-volt phantom power on each channel
- Three-segment LED level meter for each channel
- Continuously variable gain control for each channel
- Phase reverse switch per channel
- Rumble filter switch (85Hz rolloff) on each channel
- Stereo Link switch per pair of channels
- Built-in passive splitter
- Balanced insert send and return jacks (1/4-inch TRS)
- Dual A-Net outputs
- A-Net Expansion jack for 32x0 and 16x16 channel systems
- AN-16/i 16-Channel Input Module
- Sixteen balanced audio inputs (TRS connectors)
- Sixteen balanced Thru connectors (TRS)
- A-Net Out and A-Net Expansion digital audio network connections (Cat-5)
- Stereo Link switches for each channel pair
- AN-16/o 16-Channel Output Module
- Sixteen balanced audio outputs with DB25 multipin connectors
- A-Net In, A-Net Out, and A-Net Expansion network connections
- Two-position output level switch per channel pair (mic level or line level)
- Signal and Clip LEDs
- Heavy duty locking Neutrik EtherCon connectors
- A-16D Pro A-Net Distributor and DC Power Source
- One A-Net input, eight powered A-Net outputs
- A-Net Thru for system expansion (passive A-Net output)
- Isolated DC power supplies for eight A-Net Personal Mixers via the Cat-5e cable
- Standard IEC power connection
- EtherCon connections throughout
- Multiple A-Net Distributors can be used in a system
- A-16II Personal Mixer
- 16-channel stereo mixer
- Fully adjustable pan per channel
- Line/Headphone audio output
- Auto-detect mono/stereo circuitry
- Simple set-up with Cat-5e cables
- Sixteen Preset locations for storing custom mixes
- Channels can be soloed, muted, or grouped
- Global trim for reducing all channel volumes
- Sixteen channel select buttons with dual LEDs
- Pan/Spread control with LED readout
- Channel volume control with LED level readout
- Master Volume, Treble, and Bass controls
- Includes one Aviom L-30 30' Cat-5e cable
- AN-16SBR System Bridge Splitter
- Two identical 1U rack-mount modules, each with:
- Four Neutrik EtherCon connectors, labeled A, B, C, and D (16 channels each)
- One Neutrik EtherCon connector for Bridge output (up to 64 channels)
- Requires no power supply
- Multiple AN-16SBR units can be used to create complex systems
- AN-16/i-M 16-Channel Mic and Line Level Input Module
- Input: XLR, TRS; Combo Jack
- Insert Send/ Return: Connector: TRS, Signal; Impedance Balanced, Nominal Level; 0 dBu; A-Net Output: one Category 5 (RJ45 connector); A-Net Expansion: one Category 5 (RJ45 connector)
- Gain Range:
- Mic: +6dB to +60dB, variable
- Line: -15dB to +36dB, variable
- Input Impedance: Mic: 2.4 ohms, Line (TRS): 33k ohms, Insert Return: 39k ohms
- Low Cut Filter: -3dB @85Hz, -18dB per octave
- Phantom Power: +48 volts, per channel
- A/D Converters: 24 bit
- Digital Outputs: A-Net: 2 (Main and Aux), A-Net Expansion: 1
- Power Supply: Internal, universal switching type; standard IEC cable provided
- Voltage: 100-240VAC, 50-60Hz, 60W
- Dimensions: 19" wide x 9.25" deep x 5.25" high (3U)
- Weight: 12 lbs.
AN-16/i 16-Channel Input Module - Analog to Digital Conversion: 48kHz sample rate, 24 bit
- Frequency Response: 4Hz-22kHz
- A-Net Output: one Category 5 (RJ45 connector)
- A-Net Expansion: one Category 5 (RJ45 connector)
- Gain Switch: Four Position, -10dBv, 0dBu, +4dBu and +22dBu
- Channel LED Indicators: Signal Present and Clip, per channel
- Line Input Impedance: 48k ohms
- Power: 18-24 VDC, 500mA
- Dimensions: 19" wide x 6.7" deep x 1.75" high (1U)
- Weight: 6.8 lbs.
AN-16/o 16-Channel Output Module - Digital to Analog Conversion Bit Depth: 24 bit
- A-Net Input: 1 Ethercon RJ45 connector
- A-Net Output: 1 Ethercon RJ45 connector
- A-Net Expansion: 1 Ethercon RJ45 connector
- Outputs: 2 DB25 multipin connectors
- Peak Outputs Level: Selectable: +4dBu or -17dBu
- Channel LED Indicators: Signal Present and Clip per Channel
- LED Indicators: A-Net Active
- Power: 18-24 VDC, 500mA
- Dimensions: 19" wide x 6.7" deep x 1U high
- Weight: 6.5 lbs.
A-16D Pro A-Net Distributor and DC Power Source - A-Net Input: One EtherCon RJ45 connector
- A-Net Thru: One EtherCon RJ45 connector, unpowered
- A-Net Outputs: 8 EtherCon RJ45 connectors, powered (DC)
- LEDs: Power On; A-Net Active
- Pro16 A-Net: 16 channels of digital audio over Cat-5e cable uses unshielded Cat-5e UTP (or better) cable
- Power Supply: Internal, universal switching type
- Input Voltage: 100-240VAC, 50-60Hz, 60W
- Output Voltage for Personal Mixers: 18-24 VDC, 0.5 amp transmitted over the Cat-5e cable
- Dimensions: 19" (482.6 mm) wide x 14.25" (362 mm) deep x 2U, 3.5" (88.9 mm) high
- Weight: 12.0 lbs (5.44 kilo)
A-16II Personal Mixer - A-Net Input/ Output: 1 input, 1 output Category 5 (RJ45 connector)
- Digital to Analog Conversion Bit Depth: 24 bit
- Signal to Noise Ratio (Referenced to 0dB): -103dB
- Treble: +/-12dB at 9kHz shelving
- Bass: +/-12dB at 160Hz shelving
- Maximum Levels (RMS): Line/Headphone outs: 1.0 watt at 100 ohms
- Line/Headphone outs: 140 ohms
- Dimensions: 10.75" wide x 5.6" deep 2.25" high
- Weight: 3.4 lbs.
- Options (sold separately): EB-1 Extension Bracket
AN-16SBR System Bridge Splitter - A-Net Input/Output: four EtherCon RJ45 Connectors
- A-Net Bridge: one EtherCon RJ45 Connector
- Dimensions: 1U high x 19" (482.6mm) wide x 1.25" (31.75mm) deep
- Weight: 1.0 lb (.45 kilo)
MT-1 Mic Stand Mount - Boxed Weight: 1lb.
- Boxed Dimensions: 7"w x 5"d x 3"h
