- AN-16/i-M 16-Channel Mic and Line Level Input Module
- Sixteen high quality mic preamps, with 24-bit A/D converters
- XLR mic or 1/4-inch TRS balanced line-level inputs on combo jacks
- 48-volt phantom power on each channel
- Three-segment LED level meter for each channel
- Continuously variable gain control for each channel
- Phase reverse switch per channel
- Rumble filter switch (85Hz rolloff) on each channel
- Stereo Link switch per pair of channels
- Built-in passive splitter
- Balanced insert send and return jacks (1/4-inch TRS)
- Dual A-Net outputs
- A-Net Expansion jack for 32x0 and 16x16 channel systems
- AN-16/i 16-Channel Input Module
- Sixteen balanced audio inputs (TRS connectors)
- Sixteen balanced Thru connectors (TRS)
- A-Net Out and A-Net Expansion digital audio network connections (Cat-5)
- Stereo Link switches for each channel pair
- AN-16/o 16-Channel Output Module
- Sixteen balanced audio outputs with DB25 multipin connectors
- A-Net In, A-Net Out, and A-Net Expansion network connections
- Two-position output level switch per channel pair (mic level or line level)
- Signal and Clip LEDs
- Heavy duty locking Neutrik EtherCon connectors
- AN-16/i-M 16-Channel Mic and Line Level Input Module
- Input: XLR, TRS; Combo Jack
- Insert Send/ Return: Connector: TRS, Signal; Impedance Balanced, Nominal Level; 0 dBu; A-Net Output: one Category 5 (RJ45 connector); A-Net Expansion: one Category 5 (RJ45 connector)
- Gain Range:
- Mic: +6dB to +60dB, variable
- Line: -15dB to +36dB, variable
- Input Impedance: Mic: 2.4 ohms, Line (TRS): 33k ohms, Insert Return: 39k ohms
- Low Cut Filter: -3dB @85Hz, -18dB per octave
- Phantom Power: +48 volts, per channel
- A/D Converters: 24 bit
- Digital Outputs: A-Net: 2 (Main and Aux), A-Net Expansion: 1
- Power Supply: Internal, universal switching type; standard IEC cable provided
- Voltage: 100-240VAC, 50-60Hz, 60W
- Dimensions: 19" wide x 9.25" deep x 5.25" high (3U)
- Weight: 12 lbs.
AN-16/i 16-Channel Input Module - Analog to Digital Conversion: 48kHz sample rate, 24 bit
- Frequency Response: 4Hz-22kHz
- A-Net Output: one Category 5 (RJ45 connector)
- A-Net Expansion: one Category 5 (RJ45 connector)
- Gain Switch: Four Position, -10dBv, 0dBu, +4dBu and +22dBu
- Channel LED Indicators: Signal Present and Clip, per channel
- Line Input Impedance: 48k ohms
- Power: 18-24 VDC, 500mA
- Dimensions: 19" wide x 6.7" deep x 1.75" high (1U)
- Weight: 6.8 lbs.
AN-16/o 16-Channel Output Module - Digital to Analog Conversion Bit Depth: 24 bit
- A-Net Input: 1 Ethercon RJ45 connector
- A-Net Output: 1 Ethercon RJ45 connector
- A-Net Expansion: 1 Ethercon RJ45 connector
- Outputs: 2 DB25 multipin connectors
- Peak Outputs Level: Selectable: +4dBu or -17dBu
- Channel LED Indicators: Signal Present and Clip per Channel
- LED Indicators: A-Net Active
- Power: 18-24 VDC, 500mA
- Dimensions: 19" wide x 6.7" deep x 1U high
- Weight: 6.5 lbs.
