Audio-Technica U891RCx Cardioid Condenser Boundary Microphone with Local or Remote Switching Unterminated Black
1295731719098 POS #:106349285
Write a Review
A wide-range condenser microphone with a cardioid polar pattern, the U891RCx is equipped with local or remote switching options. For flexible control in conference and boardroom installations, the uni... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
A wide-range condenser microphone with a cardioid polar pattern, the U891RCx is equipped with local or remote switching options. For flexible control in conference and boardroom installations, the unit's external contact closure ability allows a user to trigger an external device”a camera, for instance”from a switch on the microphone. Another ease-of-use feature: the microphone's activation switch can be set to three operating modes: touch-on/touch-off, press to talk, and press to mute. The mic is also equipped an 80 Hz low-cut UniSteep filter to reduce pickup of low-frequency ambient noise. Its red LED status indicator can be controlled remotely. UniGuard innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; a unique rotating PivotPoint connector changes the cable exit point”no tools required. It requires 11 to 52V DC phantom power, which operates the microphone and switch circuitry.
An activation switch can be set to any of three operating modes: "touch-on/ touch-off," "touch-to-talk" and "touch-to-mute"
External contact closure capability permits control of remote devices from microphone switch
External LED control allows for accurate depiction of the live status of the microphone
PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
Low-profile design with low-reflectance finish for minimum visibility
Improved switch design
Element: fixed-charge back plate, permanently polarized condenser
Polar pattern: half-cardioid (cardioid in hemisphere above mounting surface)
Frequency response: 30-20,000 Hz
Low frequency roll-off: 80 Hz, 18 dB/octave
Open circuit sensitivity: “34 dB (19.9 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum input sound level: 130 dB SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical): 104 dB, 1 kHz at Max
SPL signal-to-noise ratio: 68 dB, 1 kHz at 1 Pa
Phantom power requirements: 11-52V DC, 4 mA typical
Cable: 7.6 m (25.0') long, 3.2 mm (0.13") diameter, 5-conductor shielded cable (2 conductors under shield; 3 control wires outside shield); TA5F-type connector at microphone end, output end stripped and tinned for connection to electronic device
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the