Designed to plug directly into a panel or desk-mounted XLRF-type connector, the U859QL condenser microphone features an ultra-flexible small-diameter design. Equipped with self-contained electronics, ... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
Designed to plug directly into a panel or desk-mounted XLRF-type connector, the U859QL condenser microphone features an ultra-flexible small-diameter design. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise. The mic is 18.90" long.
Designed for high-quality sound reinforcement, professional recording and broadcasting
Superior off-axis rejection for maximum gain before feedback
Easy-to-adjust, rugged, small-diameter, alternating gooseneck with virtually no "memory" permits quick positioning into desired shape
UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Self-contained electronics eliminate need for external power module
Quick-mount design with 3-pin XLRM-type connector insert at base plugs into any standard XLRF-type surface or cable connector
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 100-16,000 Hz
Low Frequency Roll-Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: ”43 dB (7.9 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 140 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical): 111 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Switch: Flat, roll-off
Weight: 5.4 oz (141 g)
Dimensions: 18.90" (480.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74 (18.9 mm) base diameter