The U853PMWU UniLine condenser hanging microphone features Audio-Technica's UniLine line-cardioid element and comes equipped with a wall/ceiling plate power module for permanent installation in a stan... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The U853PMWU UniLine condenser hanging microphone features Audio-Technica's UniLine line-cardioid element and comes equipped with a wall/ceiling plate power module for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone is equipped with UniGuard innovations that offer unsurpassed immunity from radio frequency interference. It accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Its 80 Hz low-cut UniSteep filter reduces pickup of low-frequency ambient noise.
Designed for suspension over choirs, instrumental groups and theater stages
Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
Superior off-axis rejection for maximum gain before feedback
UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Accepts interchangeable elements to permit angle of acceptance from 90 to 360
Low-profile design with low-reflectance finish for minimum visibility
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line Cardioid
Frequency Response: 30-20,000 Hz
Low Frequency Roll-off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: ”35 dB (11.2 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum Input Sound Level: 124 dB, 1 kHz at 1% T.H.D.
Dynamic Range (Typical): 102dB, 1 kHz at Max SPL
Signal-To-Noise Ratio: 72 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Switches: Flat, roll-off; 0 dB/ +10 dB gain setting