The Audio-Technica BP407L is a shotgun condenser mic that at 21.22" long, is among the longest shotgun microphones on the market. Originally developed at the request of broadcast professionals, this A... Read More
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Audio-Technica BP407L is a shotgun condenser mic that at 21.22" long, is among the longest shotgun microphones on the market. Originally developed at the request of broadcast professionals, this AT microphone boasts an extremely narrow polar pattern, excellent rejection from the sides and rear of the microphone, along with crisp, intelligible audio reproduction. The Audio-Technica BP4071L mic offers switchable low-frequency roll-off and a 10 dB pad, and comes generously equipped with a stand clamp, windscreen, and case. Requires 48V DC phantom power.
Overall length of 21.22" with an extremely narrow, highly directional pickup pattern
Ideal for use in broadcasting, film/TV production, and theater sound reinforcement
Direct-coupled, balanced output ensures a clean signal even in high-output conditions
Transformerless design for improved pickup of transients
Rugged housing made of lightweight structural-grade aluminum alloy
Interference tube design for narrow acceptance angle
Switchable 80 Hz high-pass filter & 10 dB pad
RoHS-compliant ” free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Element: Externally polarized (DC bias) capacitor Polar Pattern: Line + gradient Frequency Response: 20-18,000 Hz Low Frequency Roll-Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa Impedance: 50 ohms Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal) Noise; 13 dB SPL Dynamic Range (Typical): 128 dB, 1 kHz at Max SPL Signal-To-Noise Ratio: 81 dB, 1 kHz at 1 Pa Phantom Power Requirements: 48V DC, 4.8 mA typical Switches: Flat, roll-off; 10 dB pad (nominal) Weight: 175 g (6.2 oz) Dimensions: 539.0 mm (21.22") long, 21.0 mm (0.83") maximum body diameter Output Connector: Integral 3-pin XLRM-type Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8147 windscreen; two O-Rings; protective carrying case Audio-Technica Case Style: SG5
One year parts and labor warranty.