The Audio-Technica BP4071 is a shotgun condenser mic specially created to meet the pickup demands of broadcasting, film/TV sound, professional recording, wildlife recording and theater sound reinforce... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Audio-Technica BP4071 is a shotgun condenser mic specially created to meet the pickup demands of broadcasting, film/TV sound, professional recording, wildlife recording and theater sound reinforcement. The AT BP4071 is particularly useful for miking dynamic action in film or TV audio as well as in spot miking techniques in music studios or theaters. The 15.55"-long BP4071 mic provides a low noise floor and direct-coupled, balanced output for a clean signal even in high-output conditions. Audio-Technica has pioneered an interference tube design in the BP4071 microphone that provides the same directivity as mics up to 50 percent longer. Requires 48V DC phantom power.
Designed for use in broadcasting, film/TV production, and theater sound reinforcement applications
Direct-coupled, balanced output ensures a clean signal even in high-output conditions
Innovative acoustic design provides same directivity as mics up to 50% longer
Rugged housing made of lightweight structural-grade aluminum alloy
Transformerless design for improved pickup of transients
Switchable 80 Hz high-pass filter & 10 dB pad
RoHS-compliant ” free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.;
151 dB SPL, with 10 dB pad (nominal)
Noise; 13 dB SPL
Dynamic Range (Typical): 128 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio: 81 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.8 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Weight: 136 g (4.8 oz)
Dimensions: 395.0 mm (15.55") long, 21.0 mm (0.83") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8145 windscreen; two O-Rings; protective carrying case
Audio-Technica Case Style: SG3
One year parts and labor warranty.