Skip to main content Skip to footer

Audio-Technica ATW201L Lavalier Mic System

Item #: 
127474180484366976
  • Write a Review

The Freeway Series lavalier system provides exceptional value, interference-free performance and versatile performance quality. The VHF frequency is assigned with traveling in mind. An advanced dipole... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products
Overview

The Freeway Series lavalier system provides exceptional value, interference-free performance and versatile performance quality. The VHF frequency is assigned with traveling in mind. An advanced dipole antenna extends range. A dual-power battery switch extends battery life. The lavalier element is a minature cardioid condenser the provides superior performance.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

SPECIFICATIONS
  • ATW-R200 Receiver: Non-diversity, single-channel dual antenna system
  • ATW-T201 UniPak Transmitter: Specifications:
  • Audio Output: 350 mV (at 1 kHz, ±10 kHz deviation, 100 k ohm load
  • Battery (not included): 9V (NEDA type 1604) alkaline
  • Battery Life: Approximately 15 hours (High) and 20 hours (Low)
  • Current Consumption: 30 mA typical
  • Dimensions: 8.27" (210.0 mm) W x 1.72" (43.5 mm) H x 4.73" (120.0 mm) D
  • Dynamic Range: >=90 dB, A-weighted
  • Image Rejection: 50 dB minimum
  • Input Connections: High impedance, low impedance, bias
  • Output Connector: 1/4" phone jack
  • Power Supply: 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply
  • RF Power Output: 10 mW (High) and 2 mW (Low) typical
  • Sensitivity: 20 dBV for 60 dB S/N (IEC-weighted)
  • Signal-to-noise Ratio: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
  • Spurious Emissions: Under federal regulations
Pro Coverage
MANUFACTURER'S WARRANTY
One year parts and labor warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.