Audio-Technica ATW-R1810 1800 Series Single-Channel Receiver
Write a Review
The Audio Technica ATW-R1810 single-channel receiver has true diversity operation: two antennas feed two completely independent RF sections on the same frequency; automatic logic circuitry selects the... Read More
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Audio Technica ATW-R1810 single-channel receiver has true diversity operation: two antennas feed two completely independent RF sections on the same frequency; automatic logic circuitry selects the superior signal. The ATW-R1810 receiver features BNC-type antennae connectors, output and monitor levels, a balanced XLR output and a LCD (Liquid Crystal Display) that shows battery status and frequency settings.
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Compact receiver is easy to mount on a camera
UHF reception with 996 frequencies selectable in 25 kHz steps
Automatic frequency scanning for easy selection of open channels
Tone Lock squelch system eliminates interference when transmitter is off
Balanced audio output
Headphone monitor output with independent level control
Soft-touch controls for easy frequency selection
True Diversity operation for resistance to multi-path interference and dropouts
LCD frequency and battery status display with backlight
Antenna and AF Peak LED indicators
Easy, user-friendly operation
Clear, natural sound quality
Powered by AA batteries
Receiving System: Dual independent RF sections, automatic-switching diversity Image Rejection: >50 dB typical Signal-to-Noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz) Sensitivity: 25 dBuV, (S/N 60 dB at 5 kHz deviation, A-weighted) Audio Output (balanced): 27 mV (at 1 kHz, ±5 kHz deviation) Output Connector: 3-pin mini XLR (TA3M-type) Monitor Headphone Output (typical): 35 mW max., 32 ohm load Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring External Power Requirements: 12V DC nominal, 500 mA Batteries (not included): Four 1.5V AA alkaline Current Consumption (battery): 315 mA typical Battery Life: 10 hours typical, depending on battery type and use pattern Dimensions: 2.95" (75.0 mm) W x 4.92" (125.0 mm) H x 1.25 (32.0 mm") D Net Weight: (without batteries) 10.5 oz. (300 grams) Accessories Included: Two flexible UHF antennas; one 18" TA3F to XLRM output cable; belt pouch
One year parts and labor warranty.
Comments about Audio-Technica ATW-R1810 1800 Series Single-Channel Receiver:
I'm using this along with the T1802 plug in transmitter so I can mic up my video recordings for scenes on claudia-marie.com This is a 100% professional unit that works fantastic and is built like a tank!
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the