Audio-Technica ATW-3192A-TH Wireless System  

Item #: 
127474165078316118
  • Write a Review

The Audio-Technica ATW-3192A Wireless System includes:

ATW-R3100 Receiver, ATW-T310 UniPak Transmitter, BP892cW-TH Omnidirectional Condenser Headworn Microphone (beige), element covers, win... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Audio-Technica ATW-3192A Wireless System includes:

ATW-R3100 Receiver, ATW-T310 UniPak Transmitter, BP892cW-TH Omnidirectional Condenser Headworn Microphone (beige), element covers, windscreens and clothing clip.

With automatic frequency scanning to find and set the best available channel, 200 selectable UHF channels, true diversity protection from RF hits and dropouts, soft-touch controls, easy setup and great sound, the 3000 Series wireless delivers truly professional performance.

The versatile UniPak body-pack transmitter features a secure 4-pin locking connector compatible with a wide range of microphones, as well as a guitar cable. A 3-position sliding cover on the transmitter's control panel prevents accidental shut-off or channel-switching.

The 3000 Series is available with either a cardioid dynamic or cardioid condenser handheld transmitter featuring robust metal construction and slim ergonomic design. The ATW-T341 handheld transmitter includes the stage-proven Artist Elite AE4100 cardioid dynamic element, while the ATW-T371 handheld transmitter features the Artist Series ATM710 cardioid condenser element.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

Features
  • Automatic frequency scanning
  • 200 PLL-synthesized channels per band selectable via soft-touch controls on receiver and transmitter
  • Available in two frequency bands: 541.500 - 566.375 MHz (TV Channels 25 - 30); 655.500 - 680.375 MHz (TV Channels 44 - 49)
  • True Diversity operation selects the better signal from two independent receiver sections, reducing dropouts
  • Interference-resistant UHF band operation
  • Advanced digital Tone Lock squelch
  • Red alert light that warns of low battery power, signal loss and input overload
  • Transmitter battery-life fuel gauge on the receiver
  • Ground-lift switch
  • Balanced and unbalanced audio output jacks
  • Two receivers can be mounted side-by-side in a single 19" rack space
Specifications
  • Overall ATW-3192A Wireless System Specifications:
    Operating Frequencies: UHF Band D: 541.500 MHz to 566.375 MHz
    Number Of Channels: 200 total per band
    Frequency Stability: +/-0.005%, Phase Lock Loop frequency control
    Modulation Mode: FM
    Normal Deviation: +/-10kHz
    Operating Range: 300' typical
    Frequency Response: 70Hz to 15kHz
    ATW-R3100 Receiver Specifications:
    Receiving System: Dual independent receivers, automatic-switching diversity
    Image Rejection: 60dB nominal, 55dB minimum
    Signal-to-Noise Ratio: 110dB at 35kHz deviation (IEC-weighted), maximum modulation 75kHz
    Total Harmonic Distortion: <=1% (10kHz deviation at 1kHz)
    Sensitivity: 24 dBuV (S/N 60dB at 5kHz deviation, IEC-weighted)
    Intermediate Frequency: 243.950 MHz, 10.7 MHz
    Audio Output: Unbalanced: 50 mV (at 1kHz, +/-5kHz deviation, 10k ohm load); Balanced: 32 mV (at 1kHz, +/-5kHz deviation, 10k ohm load)
    Output Connectors: Unbalanced: 1/4" TS ("mono") phone jack; Balanced: XLRM-type
    Power Supply: 120V AC 60 Hz, or 12-18V DC, 500 mA, center positive, with external supply
    Dimensions (W x H x D): 8.27" x 1.93" x 7.20"
    Weight: 2.4 lbs
    Accessories Included: AC adapter; two flexible UHF antennas; rack-mountadapters
    ATW-T310 UniPak Body-Pack Transmitter Specifications:
    RF Power Output: High: 30 mW; Low: 10 mW, nominal
    Spurious Emissions: Under federal regulations
    Dynamic Range: >=110 dB, A-weighted
    Input Connections: High impedance, low impedance, bias
    Antenna Tip Color: Blue
    Batteries: Two 1.5V AA alkaline (not included)
    Current Consumption: High: 200 mA; Low: 150 mA, typical
    Battery Life: Approx. 6 hours (high); 8 hours (low), depending on battery type and use pattern
    Dimensions (W x H x D): 2.60" x 3.43" x 0.94"
    Net Weight: 2.8 oz
Warranty
MANUFACTURER'S WARRANTY
One year parts and labor warranty.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
 
4.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to Top

(4 of 5 customers found this review helpful)

 
4.0

Great performer at a low price

By Ken Wozniak

from South Bend, IN

I bought this system for use by our pastor for church services. She likes how inconspicuous the headset is, being nearly invisible in the video recordings made of the services. The sound is great, not hollow like a less expensive headset mic we tried. The body pack transmitter feels solid, has a good display, and is easy to use, although the display could use a back-light. We have had zero interference and no drop-outs. Typically, the transmitter is about 100 feet from the receiver. I stop short of a 5-star review simply because of construction of the receiver. It doesn�ۡ���t feel cheap, just a bit fragile. The metal used on the supplied rack mounting brackets is thin, as well. For our permanent install, the construction is durable enough, but I don�ۡ���t know how it would hold up to road use. As long as we don�ۡ���t pound on it, I�ۡ���m sure it will hold up fine. The input graph, transmitter battery meter, and signal strength meter on the light up LCD display make system monitoring a breeze. Overall, we are very happy with this system and would not hesitate to buy another if the need arises. A few nits to pick, but nothing that affects performance. For the price, this system cannot be beat. Highly recommended.

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.