Audio-Technica ATW-3110b 3000 Series UniPak Wireless System Band D
Write a Review
The Audio Technica ATW-3110b UniPak Wireless System-part of Audio-Technica's third-generation 3000 Series wireless systems-offers up to 996 selectable UHF frequencies. The ATW-3110b delivers clear sou... Read More
The Audio Technica ATW-3110b UniPak Wireless System-part of Audio-Technica's third-generation 3000 Series wireless systems-offers up to 996 selectable UHF frequencies. The ATW-3110b delivers clear sound and intuitive operation. With the ATW-311b, Audio-Technica has simplified the selection of usable frequencies, increased system reliability, and illuminated transmitter screens for clear reads on dark stages. It all adds up to the luxury of rock-solid, richly detailed high-fidelity sound.
The versatile Audio-Technica ATW-T310b UniPak body-pack transmitter is equipped with a secure 4-pin locking connector compatible with a wide range of microphones, as well as a guitar cable. A 3-position sliding cover on the transmitter's control panel prevents accidental shut-off or channel-switching. The UniPak's locking battery compartment provides a more secure latch and more robust design.
The Audio-Technica ATW-R3100b receiver is equipped with automatic frequency scanning for easy setup. It also features true diversity reception. Two antennas feed two completely independent RF sections on the same frequency; automatic logic circuitry continuously compares and selects the superior received signal, providing better sound quality and reducing the possibility of interference and dropouts. Soft-touch controls provide convenient access to a variety of functions, while a backlit LCD information display provides constant monitoring of system operation, including indication of the transmitter's battery status. The receiver is half-width for a standard 1U 19" rack mount; rack-mount adapters are included.
996 UHF frequencies
Antenna power available for powered antennas & other in-line RF devices
Nine pre-coordinated frequency scan groups simplify selection of usable frequencies in a multichannel wireless system
True Diversity operation reduces dropouts
Advanced digital Tone Lock squelch effectively blocks stray RF and communicates transmitter data for receiver display
Transmitter offer backlit LCD & dual-color LED
Locking battery compartment with secure latch and robust design
Ground-lift switch helps eliminate audible hum caused by ground loops
Overall System UHF Operating Frequencies (Frequency Range/Number of Frequencies) Band C: 541.500 to 566.375MHz/996 Band D: 655.500 to 680.375MHz/996 Not all frequencies are available in all areas. Please check with local regulations. Minimum frequency: Step 25kHz Modulation mode: FM Maximum deviation: ±35kHz Dynamic range: > 110dB (A-weighted), typical Total Harmonic Distortion: < 1% (at 1kHz, ±17.5kHz deviation) Operating range: 100m (300'), typical Open range environment with no interfering signals. Operating temperature range -5C to +45C, 23F to 113F Battery and LCD performance may be reduced at very low temperatures. Frequency response: 70Hz to 15kHz (+1dB, -3dB)
ATW-R3100b Receiver Receiving system: True diversity Image Rejection: 60dB nominal, 55dB minimum RF Sensitivity: 20dBuV at 60dB S/N ratio (50Î termination) Maximum Output Level: XLR, balanced: +9dBV 1/4" (6.3mm), unbalanced: +7dBV Antenna Input: BNC-type, 50Î Bias voltage 12V DC, 60 mA, each Power Requirements: 12-18V DC, 500 mA Dimensions (WxDxH): 210.0mm (8.27") x 164.4mm (6.47") x 44.0mm (1.73") (Not including BNC connectors or feet) Net weight: 1.1kg (38.8oz.), without accessories Accessories: Included Two flexible UHF antennas AC adapter (country dependent) Rack-mount adapters
ATW-T310b UniPak Transmitter RF power output: High: 30mW, Low: 10mW (switchable), at 50Î Spurious emissions: Following federal and national regulations Input Connection Four-pin Locking Connector (Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +5V) Batteries: Two 1.5V AA, not included Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline), depending on battery type and use pattern Dimensions (WxdxH): 66.0mm (2.60") x 24.0mm (0.94") x 87.0mm (3.43") Net weight: 81g (2.9oz.), without batteries
One year parts and labor warranty.
GUITAR CENTER'S PRO COVERAGE Pro Coverage gives you added warranty protection for your new gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Read More.
Pro Coverage includes
Accidental damage protection (new gear only)
Free shipping (for returns or repairs)
100% coverage for commercial use
Extended return period
Extended price protection
No lemon guarantee
Free transfer of coverage to a new owner
Repair costs covered for up to three years from date of purchase
Repair authorization-toll-free by phone or via the web