Audio-Technica ATW-2129 Bodypack Wireless System with AT829cW Lavalier Microphone  

Item #: 
127474165162616388
  • Write a Review

The Audio-Technica's ATW-R2100 receiver is matched with the ATW-T210 UniPak Microphone System transmitter and AT829cW lavalier microphone for simple-yet-powerful wireless performance. At the touch of ... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Audio-Technica's ATW-R2100 receiver is matched with the ATW-T210 UniPak Microphone System transmitter and AT829cW lavalier microphone for simple-yet-powerful wireless performance. At the touch of a button, the receiver will quickly find an open channel. Interference isn't an issue thanks to the Tone Lock system, and the ground lift switch prevents hum caused by ground loops between the sound system and receiver.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

Features
  • Automatic frequency scanning finds an open channel at the touch of a button
  • All 10 user-switchable channels are compatible”for easy use with multiple systems; no confusing frequency groups
  • True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
  • Tone Lock„¢ tone squelch system fights interference
  • Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
  • Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
  • Includes rack-mount kit and detachable UHF antennas
  • system and receiver
Specifications
  • Operating Frequency: 656.125 to 678.500 MHz
    Number of Channels: 10 total
    Frequency Stability: ±0.005%, Phase Lock Loop frequency control
    Modulation Mode: FM
    Normal Deviation: ±5 kHz
    Operating Range: 300' typical
    Operating Temperature Range: 41 F (5 C) to 113 F (45 C)
    Frequency Response: 100 Hz to 15 kHz

    Receiver specifications
    Receiving System: Dual independent RF sections, automatic-switching diversity
    Image Rejection: 55 dB nominal, 50 dB minimum
    Signal-to-noise Ratio: >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
    Total Harmonic Distortion: <1% (10 kHz deviation at 1 kHz)
    Sensitivity: 20 dBV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
    Intermediate Frequency: 65.75 MHz, 10.7 MHz
    Audio Output: Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
    Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
    Output Connectors: Unbalanced: 1/4" (6.3 mm) phone jack
    Balanced: XLRM-type
    Power Supply: 120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply
    Dimensions: 8.27" (210.0 mm) W x 1.73" (44.0 mm) H
    x 6.39" (162.2 mm) D
    Weight: 2.2 lbs (1.0 kgs)
    Accessories Included: Two flexible UHF antennas, rack-mount adapters, AC adapter

    Body-pack transmitter specifications
    RF Power Output 12 mW
    Spurious Emissions Under federal regulations
    Input Connections High impedance, low impedance, bias
    Batteries Two 1.5V AA alkaline (not included)
    Current Consumption 150 mA typical
    Battery Life Approximately 9 hours (depending on battery type and use pattern)
    Dimensions 2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D
    Net Weight 2.82 oz (80 g)

    HANDHELD TRANSMITTER SPECIFICATIONS
    RF Power Output: 12 mW
    Spurious Emissions: Under federal regulations
    Microphone Element: Dynamic, unidirectional
    Batteries: Two 1.5V AA alkaline (not included)
    Current Consumption: 150 mA typical
    Battery Life: Approximately 9 hours (depending on battery type and use pattern)
    Dimensions: 9.02" (229.0 mm) long x 2.11" (53.5 mm) maximum diameter
    Net Weight: 7.81 oz (221.5 g)
    Accessory Included: AT8456a Quiet-Flex stand clamp

    AT829cW Wireless Microphone
    Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cab
Warranty
MANUFACTURER'S WARRANTY
One year parts and labor warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.