Skip to main content Skip to footer
Call and save 18% off a single item of $49 or more. Call 866-498-7882 for qualifying brands

Audio-Technica ATW-2110 2000 Series Bodypack Wireless System with Beige AT892C Headset Microphone

Item #: 
13010350683287012
  • Write a Review

Includes the Audio-Technica ATW-2110 Bodypack Wireless System and the Audio-Technica AT892C MicroSet Condenser Headworn Microphone.ATW-2110 UHF UniPak Wireless SystemIncludes the ATW-R2100 receiver an... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

Includes the Audio-Technica ATW-2110 Bodypack Wireless System and the Audio-Technica AT892C MicroSet Condenser Headworn Microphone.

ATW-2110 UHF UniPak Wireless System
Includes the ATW-R2100 receiver and ATW-T210 UniPak transmitter.

Automatic frequency scanning--standard on all 2000 Series wireless receivers--finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000 Series offers another ease-of-use standout: any of its 10 channels may be used together--eliminating confusing frequency groups and other frequency-coordination problems. The 2000 Series also features True Diversity operation, which selects the better signal from the two receiver sections to reduce dropouts; a Tone Lock tone squelch system that fights interference; a rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering; and balanced XLR and unbalanced 1/4" output jacks for use with a wide variety of audio gear. Includes rackmount kit and detachable UHF antennas. Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver.

AT892C MicroSet Condenser Headworn Microphone
The AT892C MicroSet Condenser Headworn Microphone is perfect for stage, television, and houses of worship. Inconspicuous lightweight under-ear design doesn't interfere with stage presence and provides ultimate comfort and ultrasecure fit. With a capsule diameter of just 1/10", the Audio-Technica microset provides the ultimate in low-profile, high-performance audio. Flexible, lightweight contoured loop hooks behind the ear for a secure, comfortable fit with or without glasses. Delivers the industry-standard sound quality you've come to expect from Audio-Technica. This wireless headset microphone has a rugged construction to meet the challenges of day-to-day use in production, house-of-worship, and theater settings.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

FEATURES

ATW-2110 
Automatic frequency scanning
All 10 user-switchable channels are compatible
True Diversity operation selects the better signal from the two receiver sections
Tone Lock tone squelch system
Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
Balanced XLR and unbalanced 1/4" output jacks
Includes rackmount kit and detachable UHF antennas
Ground-lift switch

AT892C
Comfy, secure fit
Minimum visibility
Omnidirectional condenser capsule
Super-high sound quality with maximum intelligibility and natural vocal reproduction
SPECIFICATIONS
ATW-2110 
Overall system
Operating Frequency: 656.125 to 678.500 MHz
Number of Channels: 10 total
Frequency Stability: +/-0.005%, Phase Lock Loop frequency control
Modulation Mode: FM
Normal Deviation: +/-5 kHz
Operating Range: 300' typical
Operating Temperature Range: 41 F (5 C) to 113 F (45 C)
Frequency Response: 100 Hz to 15 kHz

Receiver
Receiving System: Dual independent RF sections, automatic-switching diversity
Image Rejection: 55 dB nominal, 50 dB minimum
Signal-to-noise Ratio: >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
Total Harmonic Distortion: <1% (10 kHz deviation at 1 kHz)
Sensitivity: 20 dBV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
Intermediate Frequency: 65.75 MHz, 10.7 MHz
Audio Output: Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Output Connectors: Unbalanced: 1/4" (6.3 mm) phone jack
Balanced: XLRM-type
Power Supply: 120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply
Dimensions: 8.27" (210.0 mm) W x 1.73" (44.0 mm) H
x 6.39" (162.2 mm) D
Weight: 2.2 lbs (1.0 kgs)
Accessories Included: Two flexible UHF antennas, rackmount adapters, AC adapter

Body-Pack Transmitter
RF Power Output: 12 mW
Spurious Emissions: Under federal regulations
Input Connections: High impedance, low impedance, bias
Batteries: Two 1.5V AA alkaline (not included)
Current Consumption: 150 mA typical
Battery Life: Approximately 9 hours (depending on battery type and use pattern)
Dimensions: 2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D
Net Weight: 2.82 oz (80 g)

AT892C Headworn Mic
Element: Condenser
Polar pattern: Omnidirectional
Frequency response: 20-20,000 Hz
Open circuit sensitivity: ”44 dB (6.3 mV) re 1V at 1 Pa
Maximum input sound level: 122 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise ratio: 60 dB, 1 kHz at 1 Pa
Power requirements: Voltage Range: 2.5-11V , Current Consumption: 0.1 mA typical @ 5V
Weight: Microphone, boom & earpiece: 0.08 oz (2.4 g)
Dimensions: Microphone: 0.32" (8.1 mm) long, 0.11" (2.7 mm) diameter; Boom: 3.87" (98.4 mm) long, 0.042" (1.07 mm) diameter
Cable: 55" (1.4 m)
Accessories furnished: Two windscreens; two element covers; clothing clip; moisture guard; carrying case
Pro Coverage
MANUFACTURER'S WARRANTY
One year parts and labor warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.