Audio-Technica ATW-202 Freeway Handheld Wireless System
Write a Review
The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cord set. Furt... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cord set. Furthering its flexibility, the power adapter may be easily removed from the receiver case, permitting its use as a conventional in-line AC adapter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element. Includes ATW-R200 receiver and ATW-T202 handheld microphone/transmitter
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Advanced dipole antenna system
Available in 3 traveling frequencies
Removable docking power supply inserts into back of receiver
Adjustable squelch control
ATW-T202 handheld microphone/transmitter features a rugged dynamic unidirectional element
Overall: OPERATING FREQUENCY: VHF high band, 169 MHz to 172 MHz NUMBER OF CHANNELS: Fixed channel FREQUENCY STABILITY: ±0.005% MODULATION MODE: FM MAXIMUM DEVIATION: ±15 kHz OPERATING RANGE: 200' minimum OPERATING TEMPERATURE RANGE: 40 F (4 C) to 110 F (43 C) FREQUENCY RESPONSE: 80 Hz to 13 kHz
Reciever: RECEIVING SYSTEM: Non-diversity, single-channel, dual antenna system IMAGE REJECTION: 50 dB minimum SIGNAL-TO-NOISE RATIO: 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz TOTAL HARMONIC DISTORTION: <=1% (10 kHz deviation at 1 kHz) SENSITIVITY: 20 dBV for 60 dB S/N (IEC-weighted) AUDIO OUTPUT: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) OUTPUT CONNECTOR: 1/4" TS ("mono") phone jack POWER SUPPLY: 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply DIMENSIONS: 8.27" (210.0 mm) W x 1.72" (43.5 mm) H x 4.73" (120.0 mm) D NET WEIGHT: 18.9 oz (536 g); without AC adapter, 11.9 oz (336 g) ACCESSORIES INCLUDED: AD1202A 120V docking AC adapter; 120V AC IEC cordset
Handheld Transmitter: RF POWER OUTPUT: 10 mW High position, 2 mW Low position, typical SPURIOUS EMISSIONS: Under federal regulations DYNAMIC RANGE: >=90 dB, A-weighted MICROPHONE ELEMENT: Dynamic unidirectional BATTERY: 9V (NEDA type 1604) alkaline, not included CURRENT CONSUMPTION: 30 mA typical BATTERY LIFE: Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) DIMENSIONS: 9.50" (241.3 mm) long, 2.10" (53.3 mm) diameter NET WEIGHT: 12.7 oz (360 g) ACCESSORY INCLUDED: AT8456a Quiet-Flex stand clamp
One year parts and labor warranty.