Audio-Technica AT825 OnePoint X/Y Stereo Field Recording Microphone
Write a Review
Audio-Technica's compact, lightweight AT825 stereo field microphone is perfect for camera-mount applications. Designed for broadcast, professional recording, and digital audio tape (DAT) field use the... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
Audio-Technica's compact, lightweight AT825 stereo field microphone is perfect for camera-mount applications. Designed for broadcast, professional recording, and digital audio tape (DAT) field use the one point x/y AT825 microphone is equipped with 2 balanced outputs for use with professional audio and video equipment. The AT825's closely matched elements provide the spatial impact and realism of a live sound field. With switchable low-frequency roll-off the versatile AT825 microphone operates on either battery or phantom power.
Designed for broadcast and professional recording, and DAT field use
Compact, lightweight design is perfect for camera-mount applications
Closely-matched elements provide the spatial impact and realism of a live sound field
Switchable low-frequency roll-off
Operates on battery or phantom power
Elements: fixed-charge back plate, permanently polarized condenser Polar pattern: X/Y stereo Frequency response: 30-20,000 Hz Low frequency roll-off: 150 Hz, 6 dB/octave Open circuit sensitivity: -47 db (4.4 mV) re 1V at 1 Pa Channel balance: <=2.5 dB Impedance: 200 ohms balanced Maximum input sound level: 126 dB SPL, 1 kHz at 1% THD Dynamic range (typical): 102 dB, 1 kHz at max SPL Signal-to-noise ratio: 70 dB, 1 kHz at 1 Pa Phantom power requirements: 5-52V DC, 2 mA typical (each channel) Battery type: 1.5v AA/UM3 Battery current / life: 2 mA / 1000 hours typical (alkaline) Switch: flat, roll-off (recessed) Weight: 8.5 oz (240 g) Output connector: integral 5-pin XLR male-type Cable: 16.5' (5 m) long, 8 conductors under two shields, vinyl-jacketed, stereo cable with 5-pin XLR female-type connector at microphone end, two 3-pin XLR male-type connectors at output end Accessories furnished: AT8405A stand clamp for 5/8" 27-threaded stands; battery; AT8120 windscreen; soft protective pouch Audio-Technica case style: S3
Dimensions: 8.43" (214.0 mm) long, 2.44" (62.0 mm) head width, 0.83" (21.0 mm) body diameter
One year parts and labor warranty.