The Audio-Technica AT4900B-48 Microphone body is a modular component of the Audio-Technica AT4949b, AT4051b, and AT4053b Condenser Microphone systems. The Audio-Technica AT4900B-48 Microphone body is... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Audio-Technica AT4900B-48 Microphone body is a modular component of the Audio-Technica AT4949b, AT4051b, and AT4053b Condenser Microphone systems. The Audio-Technica AT4900B-48 Microphone body is designed to work with the Audio-Technica AT449B-EL omnidirectional, AT4051B-EL cardioid, and AT4053B-EL hypercardioid microphone head capsules. These microphone systems are recommended for professional recording and critical applications in broadcast. They have fast response to transients and facilitate an open, transparent reproduction of even the most difficult-to-capture instruments.
Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Works with the Audio-Technica AT449B-EL omnidirectional, AT4051B-EL cardioid, and AT4053B-EL hypercardioid microphone head capsules.
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad
Rugged turned-brass microphone housing for enduring dependability
State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
RoHS-compliant”free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Element: Externally polarized (DC bias) capacitor Polar Pattern: Depends on The Mic Head Capsule it is paired with Frequency Response: 20-20,000 Hz Low Frequency Roll-Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa Impedance: 50 ohms Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) Noise: 16 dB SPL Dynamic Range (Typical): 129 dB, 1 kHz at Max SPL Signal-To-Noise Ratio: 78 dB, 1 kHz at 1 Pa Phantom Power Requirements: 48V DC, 4.8 mA typical Switch: Flat, roll-off; 10 dB pad (nominal) Weight: Varies with Capsule Dimensions: Varies with Capsule Output Connector: Integral 3-pin XLRM-type
One year parts and labor warranty.