Audio-Technica AT4053a Small Diaphragm Hypercardioid Condenser Microphone
Write a Review
Ideal for professional recording and critical applications in broadcast, the Audio Technica AT4053 hypercardioid condenser microphone consists of the AT4900a-48 body with the AT4053a-EL hypercardioid ... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
Ideal for professional recording and critical applications in broadcast, the Audio Technica AT4053 hypercardioid condenser microphone consists of the AT4900a-48 body with the AT4053a-EL hypercardioid element. This versatile studio performer may be used with confidence in a wide variety of professional miking applications, even under the stringent demands of modern digital recording systems. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. Requires phantom power.
Direct-coupled, balanced output ensures a clean signal even in high-output conditions
Exceptionally low self-noise, very high output and fast transient response
The AT4053a consists of two modular subassemblies: an AT4900a-48 body and an AT4053a-EL head capsule (both available separately)
Switchable 80 Hz hi-pass filter
Turned-brass microphone housing with black chrome plating
Accepts optional interchangeable capsules: The AT4049a-EL omnidirectional and the AT4051a-EL cardioid (sold separately)
Element: Externally polarized (DC bias) condenser Polar pattern: Hypercardioid Frequency response: 20-20,000 Hz Low frequency roll-off: 80 Hz, 12 dB/octave Open circuit sensitivity: -33 dB (22 mV) re 1V at 1 Pa Impedance: 100 ohms Maximum input sound level: 146 db SPL, 1 kHz at 1% T.H.D. Noise: 19 dB SPL Dynamic range (typical): 127 db, 1 kHz at Max SPL Signal-to-noise ratio: 75 db, 1 kHz at 1 Pa Phantom power requirements: 48V DC, 3.2 mA typical Switch: Flat roll-off Weight (microphone): 4.2 oz. (120 g) Dimensions: 6.10" (155.0 mm) long, .83" 21.0 mm) maximum diameter Output connector: Integral 3-pin XLRM-type Accessories furnished: AT8405a clamp for 5/8"-27 threaded stands; AT8159 foam windscreen; protective pouch Audio-Technica case style: S1
One year parts and labor warranty.
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the