The Audio-Technica AT4049B is a versatile omnidirectional condenser microphone recommended for professional recording and critical applications in broadcast. Use the AT4049B mic with confidence in a w... Click To Read More About This Product
The Audio-Technica AT4049B is a versatile omnidirectional condenser microphone recommended for professional recording and critical applications in broadcast. Use the AT4049B mic with confidence in a wide variety of professional miking applications, such as acoustic instruments and percussion, where proximity effect and coloration are not desired; ambient recording for clean room sound free from off-axis coloration; and distance miking of electric guitars and other instruments in great-sounding live rooms. The greatest advantage of omni mics in general and the AT4049B in particular, is the open and extended bass response and lack of phase-cancellation problems that can occur with directional mics.
Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the Audio AT4049B microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The AT4049B microphone is fully RoHS-compliant-free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
The Audio-Technica AT4049B consists of 2 modular subassemblies: an AT4900b-48 body and an AT4049b-EL omnidirectional microphone head capsule.
Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast, and live classical recording.
Omnidirectional polar pattern provides maximum ambient pickup
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad
Rugged turned-brass microphone housing for enduring dependability
State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
RoHS-compliant ” free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Omnidirectional
Frequency Response: 20-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Impedance: 50 ohms
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.;
155 dB SPL, with 10 dB pad (nominal)
Noise: 16 dB SPL
Dynamic Range (Typical): 129 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio: 78 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.8 mA typical
Switch: Flat, roll-off; 10 dB pad (nominal)
Weight: 130 g (4.6 oz)
Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Optional Interchangeable Elements (sold separately):
Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
Audio-Technica Case Style: S1
GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.