Unobtrusive clip-on mic for brasswinds and percussion!

The Audio-Technica PRO 35 clip-on microphone is designed for sax, toms, brass and percussion. The PRO35 is a carioid condenser mic that excels in high-SPL (sound pressure level) applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. Requires phantom power.

Audio-Technica PRO 35 Cardioid Condenser Clip-on Instrument Microphone Features:

Ideal for sax, toms, brass and percussion
Excels in high-SPL applications
Ideal for active stage performances
UniMount clip permits accurate positioning, provides shock resistance and protects element
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Extended frequency response captures subtle nuances of the performance
6' (1.8 m) cable permanently attached between microphone and power module

Audio-Technica PRO 35 Cardioid Condenser Clip-on Instrument Microphone Specifications:

Element: Fixed-charge back plate, permanently polarized condenser
Polar pattern: Cardioid
Frequency response: 50-15,000 Hz
Low frequency roll-off: 80 Hz, 18 dB/octave
Open circuit sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum input sound level: 145 db SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical): 115 db, 1 kHz at Max SPL
Signal-to-noise ratio: 64 db, 1 kHz at 1 Pa
Phantom power requirements: 11-52V DC, 2 ma typical
Switch: Flat, roll-off
Weight (microphone): 0.3 oz. (8 g)
Weight (power module): 2.9 (81 g)
Dimensions (microphone): 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
Dimensions (power module): 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
Output connector (power module): Integral 3-pin XLRM-type
Cable: 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories furnished: AT8418 UniMount microphone instrument mount; AT8538 power module; soft protective pouch
Audio-Technica case style: M12

Audio-Technica PRO 35 Cardioid Condenser Clip-on Instrument Microphone Includes:

AT8418 UniMount microphone instrument mount; AT8538 power module; soft protective pouch