CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless,
operating this microphone system without a license is subject to certain restrictions:
the system may not cause harmful interference; it must operate at a low power level
(not in excess of 50 milliwatts); and it has no protection from interference received
from any other device. Purchasers should also be aware that the FCC is currently
evaluating use of wireless microphone systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit
the FCC’s wireless microphone website at
http://www.fcc.gov/cgb/wirelessmicrophones.
Compact unit is easy to mount on your camera.
The Audio Technica ATW-R1810 single-channel receiver has true diversity operation: two antennas feed two completely independent RF sections on the same frequency; automatic logic circuitry selects the superior signal. The ATW-R1810 receiver features BNC-type antennae connectors, output and monitor levels, a balanced XLR output and a LCD (Liquid Crystal Display) that shows battery status and frequency settings.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Audio-Technica ATW-R1810 1800 Series Single-Channel Receiver Features:
- Compact receiver is easy to mount on a camera
UHF reception with 996 frequencies selectable in 25 kHz steps
Automatic frequency scanning for easy selection of open channels
Tone Lock squelch system eliminates interference when transmitter is off
Balanced audio output
Headphone monitor output with independent level control
Soft-touch controls for easy frequency selection
True Diversity operation for resistance to multi-path interference and dropouts
LCD frequency and battery status display with backlight
Antenna and AF Peak LED indicators
Easy, user-friendly operation
Clear, natural sound quality
Powered by AA batteries
Audio-Technica ATW-R1810 1800 Series Single-Channel Receiver Specifications:
- Receiving System: Dual independent RF sections, automatic-switching diversity
Image Rejection: >50 dB typical
Signal-to-Noise Ratio: 104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
Sensitivity: 25 dBuV, (S/N 60 dB at 5 kHz deviation, A-weighted)
Audio Output (balanced): 27 mV (at 1 kHz, ±5 kHz deviation)
Output Connector: 3-pin mini XLR (TA3M-type)
Monitor Headphone Output (typical): 35 mW max., 32 ohm load
Monitor Headphone Jack: 3.5 mm TRS, signals on both Tip and Ring
External Power Requirements: 12V DC nominal, 500 mA
Batteries (not included): Four 1.5V AA alkaline
Current Consumption (battery): 315 mA typical
Battery Life: 10 hours typical, depending on battery type and use pattern
Dimensions: 2.95" (75.0 mm) W x 4.92" (125.0 mm) H x 1.25 (32.0 mm") D
Net Weight: (without batteries) 10.5 oz. (300 grams)
Accessories Included: Two flexible UHF antennas; one 18" TA3F to XLRM
output cable; belt pouch
Audio-Technica ATW-R1810 1800 Series Single-Channel Receiver
One year parts and labor warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
(Based on 
Based on 
