Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones.
A True Diversity UHF wireless receiver with body-pack transmitter with a headworn mic.
The Audio-Technica ATW-3192b Headworn Condenser Microphone Wireless System is part of Audio-Technica's third-generation 3000 Series. The ATW-3192b offers up to 996 selectable UHF frequencies and features for clear sound and intuitive operation.
The wireless mic system includes an Audio-Technica ATW-R3100b receiver, Audio-Technica ATW-T310b UniPak transmitter, and an Audio-Technica BP892cW-TH MicroSet Subminiature omnidirectional condenser headworn microphone. Audio-Technica has simplified the selection of usable frequencies, increased system reliability, and illuminated transmitter screens for clear reads on dark stages. It all adds up to the luxury of rock-solid, richly detailed high-fidelity sound.
The versatile Audio-Technica ATW-T310b UniPak body-pack transmitter features a secure 4-pin locking connector compatible with a wide range of microphones, as well as a guitar cable. A 3-position sliding cover on the transmitter's control panel prevents accidental shut-off or channel-switching. A locking battery compartment provides a more secure latch and more robust design.
The Audio-Technica ATW-R3100b receiver is equipped with automatic frequency scanning for easy setup. It also features true diversity reception. Two antennas feed two completely independent RF sections on the same frequency; automatic logic circuitry continuously compares and selects the superior received signal, providing better sound quality and reducing the possibility of interference and dropouts. Soft-touch controls provide convenient access to a variety of functions, while a backlit LCD information display provides constant monitoring of system operation, including indication of the transmitter's battery status. The receiver is half-width for a standard 1U 19" rack mount; rack-mount adapters are included.