Very affordable and very good.

The Audio-Technica ATW-252 Freeway VHF Wireless Microphone System is designed to provide reliable performance, easy setup and clear, natural sound quality. The Freeway VHF Wireless System from the 200 series includes the ATW-R250 receiver, and the ATW-T202 handheld microphone/transmitter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.

ATW-R250 receiver

The ATW-R250 receiver includes a space-saving switching power supply that automatically adapts to changes in mains voltage. Unlike bulky linear power supplies, this switching power supply is lightweight and compact; it uses only a single outlet space.

ATW-T202 Handheld transmitter

The ATW-T202 handheld transmitter features a unidirectional dynamic microphone element. The ATW-202 handheld transmitter uses internal 9-volt battery and has an Off/Standby/On switch, input Trim (level) adjustment and battery-save switch.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Audio-Technica ATW-252 Freeway VHF Handheld Wireless System Features:

Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, 1/4" output jack and space-saving power supply
Rugged unidirectional dynamic element on handheld microphone/transmitter
Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
Professional locking connector on UniPak body-pack transmitter

Audio-Technica ATW-252 Freeway VHF Handheld Wireless System Specifications:

Overall System
VHF high band, 169MHz to 172 MHz
Number of channels: Fixed
Frequency Stability: ±0.005%
Modulation Mode: FM
Normal Deviation: ±15 kHz
Operating Range: 200' typical
Operating Temperature Range: 40° F (4° C) to 110° F (43 ° C)
Frequency Response: 80 Hz to 13 kHz
ATW-R250 receiver
Receiving System: Non-diversity, single-channel, dual antenna system
Image Rejection: >50 dB minimum
Signal-to-Noise Ratio: 80 dB at 10 kHz deviation (A-weighted), maximum modulation 15 kHz
Total Harmonic Distortion: <1% (±10 kHz deviation at 1 kHz)
Sensitivity: 20 dBuV, (S/N 60 dB at 5 kHz deviation, A-weighted)
Audio Output (balanced): 350 mV (at 1 kHz, ±10 kHz deviation, 100 K ohm load)
Output Connector: 1/4" TS ("mono") phone jack
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions (W x H x D): 7.48" x 1.65" x 5.12, (190.0 x 42.0 x 130.0 mm)
Net Weight: (without batteries) 11.0 oz. (311 grams)
Accessories Included: Power supply
ATW-T202 Handheld transmitter
RF Power Output: High: 10 mW; Low: 2 mW, typical
Spurious Emissions: Under Federal Regulations
Dynamic Range: ±90 dB, A-weighted
Microphone Element: Dynamic unidirectional
Battery: (not included) 9V (NEDA type 1604) alkaline
Current Consumption: 30 mA typical
Battery Life: Approximately 15 hours (High); 20 hours (Low), depending on battery type and use pattern
Dimensions: 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter
Net Weight: (without battery) 12.7 oz (360 grams)
Accessory Included: AT8456a Quiet-Flex stand clamp