Clear sound quality and rock-solid dependable performance.

The Audio-Technica ATW-2192-TH is a wireless system that includes the ATW-R2100 receiver, ATW-T210 UniPak Transmitter, BP892cW-TH Omnidirectional Condenser Headworn Microphone (beige), element covers, windscreens, and clothing clip.

Audio-Technica's innovative 2000 Series wireless delivers professional performance, unheard of in its class. With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before.

Automatic frequency scanning—standard on all 2000 Series wireless receivers—finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000 Series offers another ease-of-use standout: any of its 10 channels may be used together - eliminating confusing frequency groups and other frequency-coordination problems.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Audio-Technica ATW-2192-TH Wireless System Features:

Clear sound quality and rock-solid dependable performance
Automatic frequency scanning finds an open channel at the touch of a button
All 10 user-switchable channels are compatible—for easy use with multiple systems; no confusing frequency groups
True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
Tone Lock tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

Audio-Technica ATW-2192-TH Wireless System Specifications:

Overall System Specifications
Operating Frequency: UHF band, 656.125 to 678.500 Mhz
Number of Channels: 10 total
Frequency Stability: +/-0.005%, phase lock loop frequency control
Modulation Mode: FM
Normal Deviation: +/-5kHz
Operating Range: 300' typical
Frequency Response: 100Hz to 15kHz
ATW-R2100 Receiver Specifications
Receiving System: Dual independent receivers, automatic-switching diversity
Image Rejection: 55 dB nominal, 50 dB minimum
Signal-to-Noise Ratio: >100dB at 40kHz deviation (A-weighted), maximum modulation 40kHz
Total Harmonic Distortion: <1% (+/-10kHz deviation at 1kHz)
Sensitivity: 20dBuV (S/N 60dB at 5kHz deviation, IEC-weighted)
Intermediate Frequency: 65.75 MHz, 10.7 MHz
Audio Output (AF Level set at "0"): Unbalanced: 25 mV (at 1kHz, +/-5kHz deviation, 100k ohm load); Balanced: 12.5 mV (at 1kHz, +/-5kHz deviation, 100k ohm load)
Output Connectors: Unbalanced: 1/4" phone jack; Balanced: XLRM-type
Power Supply: 120V AC 60Hz, or 12-18V DC, 350 mA, with external supply
Dimensions (W x H x D): 8.27" x 1.73" x 6.39"
Weight: 2.2 lbs
Accessories Included: Two flexible UHF antennas, rack-mount adapters, ACadapter
ATW-T210 UniPak Transmitter Specifications
RF Power Output: 12mW
Spurious Emissions: Under federal regulations
Input Connections: High impedance, low impedance, bias
Batteries (not included): Two 1.5V AA alkaline
Current Consumption: 150 mA typical
Battery Life: Approximately 9 hours (depending on battery type and use pattern)
Dimensions (W x H x D): 2.60" x 3.63" x 0.89"
Net Weight (without batteries): 2.82 oz