Audio-Technica ATW-2192-TH Wireless System

Clear sound quality and rock-solid dependable performance.

The Audio-Technica ATW-2192-TH is a wireless system that includes: ATW-R2100 receiver, ATW-T210 UniPak Transmitter, AT892cW-TH Omnidirectional Condenser Headworn Microphone (beige), element covers, windscreens, and clothing clip.

Audio-Technica's innovative 2000 Series wireless delivers professional performance, unheard of in its class. With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before.

Automatic frequency scanning - standard on all 2000 Series wireless receivers - finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000 Series offers another ease-of-use standout: any of its 10 channels may be used together - eliminating confusing frequency groups and other frequency-coordination problems.

Audio-Technica ATW-2192-TH Wireless System Features:

Clear sound quality and rock-solid dependable performance
Automatic frequency scanning finds an open channel at the touch of a button
All 10 user-switchable channels are compatible - for easy use with multiple systems; no confusing frequency groups
True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
Tone Lock tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
Overall System Specifications
Operating Frequency: UHF band, 656.125 to 678.500 Mhz
Number of Channels: 10 total
Frequency Stability: +/-0.005%, phase lock loop frequency control
Modulation Mode: FM
Normal Deviation: +/-5kHz
Operating Range: 300' typical
Frequency Response: 100Hz to 15kHz
ATW-R2100 Receiver Specifications
Receiving System: Dual independent receivers, automatic-switching diversity
Image Rejection: 55 dB nominal, 50 dB minimum
Signal-to-Noise Ratio: >100dB at 40kHz deviation (A-weighted), maximum modulation 40kHz
Total Harmonic Distortion: <1% (+/-10kHz deviation at 1kHz)
Sensitivity: 20dBuV (S/N 60dB at 5kHz deviation, IEC-weighted)
Intermediate Frequency: 65.75 MHz, 10.7 MHz
Audio Output (AF Level set at "0"): Unbalanced: 25 mV (at 1kHz, +/-5kHz deviation, 100k ohm load); Balanced: 12.5 mV (at 1kHz, +/-5kHz deviation, 100k ohm load)
Output Connectors: Unbalanced: 1/4" phone jack; Balanced: XLRM-type
Power Supply: 120V AC 60Hz, or 12-18V DC, 350 mA, with external supply
Dimensions (W x H x D): 8.27" x 1.73" x 6.39"
Weight: 2.2 lbs
Accessories Included: Two flexible UHF antennas, rack-mount adapters, ACadapter
ATW-T210 UniPak Transmitter Specifications
RF Power Output: 12mW
Spurious Emissions: Under federal regulations
Input Connections: High impedance, low impedance, bias
Batteries (not included): Two 1.5V AA alkaline
Current Consumption: 150 mA typical
Battery Life: Approximately 9 hours (depending on battery type and use pattern)
Dimensions (W x H x D): 2.60" x 3.63" x 0.89"
Net Weight (without batteries): 2.82 oz