Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones.
A frequency-agile True Diversity UHF wireless system that provides you with 300' of freedom.
Part of Audio-Technica's 2000 Series, the ATW-2110a wireless system features a ATW-R2100a receiver and an ATW-T210a UniPak bodypack transmitter to give you the peace of mind of 300 feet of range without losing your audio quality.
The ATW-R2100a is a True Diversity UHF wireless receiver operating in the UHF bands of 656.125–678.500MHz or 487.125–506.500MHz. The automatic frequency scanning eliminates the need for searching for clear channels and automatically selects the most appropriate frequency for the area in which the wireless is operating. A pre-coordinated integral channel plan allows for simultaneous operation of any of the 10 channels in a given location. The flexibility in programming both the receiver and transmitters eliminates confusing frequency groups and other frequency coordination problems. A two-position switch turns on/off 12V AC antenna power for use with powered antennas or accessories.
Its advanced Tone Lock adjustable squelch system fights interference. A high-sensitivity dual IF design using true diversity operation with silent automatic switching provides dropout-free performance. The front panel LCD receiver display provides continuous indication of transmitter RF signal strength, selection of internal dual (True Diversity) receiving sections (A&B), along with the audio modulation level of the received signal. Both balanced XLR-type and unbalanced 1/4" output connections with output gain adjustments are located on the rear panel. The XLR-type output includes a ground lift switch to prevent ground loops. Features not often found in other receivers include a metal receiver construction, detachable wave receiver antennas, AC or 12–18V DC operation, front panel power switch, and included rackmount kit.
ATW-T210a UniPak Bodypack
The versatile ATW-T210a UniPak bodypack transmitter has both low- and high- impedance inputs plus a bias connection, for use with dynamic and electret condenser microphones, as well as Hi-Z instrument pickups.