Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones.
A basic system equipped with all the professional 1800 Series features.
The Audio Technica ATW-1812 1800 Series Camera Mount UHF Wireless System includes ATW-R1810 single-channel receiver and an ATW-T1802 plug-on transmitter. The ATW-1812 offers UHF reception of 996 user-selectable frequencies in 25 kHz steps. The It also features automatic frequency scanning, Tone Lock squelch, back-lit LCD, soft-touch buttons, headphone monitor output with independent level control, and durable metal construction. It is an an extremely flexible, professional, and easy-to-use portable wireless system..
ATW-R1810 single-channel receiver
The Audio Technica ATW-R1810 single-channel receiver has true diversity operation: two antennas feed two completely independent RF sections on the same frequency; automatic logic circuitry selects the superior signal. The ATW-R1810 features BNC-type antennae connectors, output and monitor levels, a balanced XLR output and a LCD (Liquid Crystal Display) that shows battery status and frequency settings.
ATW-T1802 plug-on transmitter
The ATW-T1802 plug-on transmitter features a locking XLR connector for adapting dynamic and condenser microphones and selectable high and low transmission modes to conserve battery life/maximize power. The ATW-T1802 Plug-on Transmitter also provides power to condenser microphones rated to operate on 12V phantom power or less.