Fashion meets function with ATH-PRO5 MS camouflage closed-back dynamic stereo monitor headset.

The ATH-PRO5 MS camouflage dynamic headphones have 40mm drivers with a neodymium magnet system and CCAW voice coils that deliver outstanding sound quality. A coiled cable at the left earpiece terminates to a mini plug with included ¬" adapter.

Audio-Technica ATH-PRO5MS Monitor Headphone Features:

Rotating earpieces with camouflage housing for easy one-ear monitoring
Closed-back dynamic stereo headphones deliver exceptional clarity
40 mm drivers with neodymium magnets and copper-clad aluminum wire voice coils
Rich bass response with extended high end
Circumaural design ensures superior isolation
Adjustable cushioned headband and lightweight design for maximum comfort
Gold-plated 1/8" (3.5 mm) stereo connector with 1/4" (6.3 mm) adapter
Ultra-flexible coiled cable with left-side entry

Audio-Technica ATH-PRO5MS Monitor Headphone Specifications:

Type Closed-back Dynamic
Driver Diameter 40 mm
Magnet Neodymium
Voice Coil Copper-clad aluminum wire
Frequency Response 15 — 28,000 Hz
Maximum Input Power 1,300 mW
Sensitivity 103 dB/mW at 1 kHz
Impedance 40 ohms
Weight 200 g
Cable 1.5 m (Single) OFC
Connector 1/8" (3.5 mm) mini stereo, gold-plated
Accessory Included Detachable 1/4" (6.3 mm) adapted

Open Circuit Sensitivity At 1 kHz, with 1 Pa (Pascal) = 94dB sound pressure level (SPL), measured at diaphragm. Stated in dB re 1 volt, and in millivolts.
Noise, typical A-weighted, using Audio Precision System One measurement system.
Weight Stated for the microphone only, without accessories, and without attached cable/power module, if applicable.
Frequency Response (Graph) Shows mic output versus frequency with a constant sound input level from a source 0.5 meters from the diaphragm. Each vertical division in the graph is 10dB. A dashed line, if present, shows the effect of a low-roll-off (hi-pass
Polar Pattern (Graph) Shows mic output versus angular direction of the sound source, with a constant sound input level at 1 kHz, at a constant distance from the diaphragm. Zero degrees (0ø) is the "front" of the mic. Each circular division in the gra
Related Models Some profile pages provide links to other models of a most-similar or closely related type or function that may also be of interest.
Headphone Sensitivity Input of 1 milliwatt at 1 kHz into rated impedance; output in dB SPL, using a Brel & Kjaer 4153 coupler.
Maximum Input Power At 1 kHz into rated impedance.
Boom Mic Sensitivity Open circuit, at 1 kHz, with 1 Pa (Pascal) = 94dB sound pressure level (SPL), measured at diaphragm. Stated in dB re 1 volt, and in millivolts.