Skip to main content Skip to footer
Call and save on most brands call 866 498 7882

Astatic by CAD 202R Mini Omni Installation Boundary Microphone

Item #: 
127474165006415806
  • Write a Review

The Astatic 202R microphones are miniature, high performance electret condenser microphones designed for low-profile mounting in panels, tables, or ceilings. They have been redesigned with improved RF... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Astatic 202R microphones are miniature, high performance electret condenser microphones designed for low-profile mounting in panels, tables, or ceilings. They have been redesigned with improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie capability and other similar devices. They are excellent choices for teleconferencing, voice-lift, professional recording, courtrooms, surveillance and many other critical applications. The microphone is 1.1" in diameter at the largest point and mounts in a 13/16" opening in panels up to 2" thick. The 202Rs mics are extremely rugged and feature a solid machined brass body and Astatic Flex-FormTM hardened grille screens. It also has a built-in 80Hz, 12dB/octave high pass filter and are terminated with standard male 3-pin XLR connectors. Color-matched shockmount isolators are also included with each microphone. (15/16" mounting hole required when using shock isolators). It features self-contained low noise electronics and operate from standard P12, P24 and P48 phantom power. The front of the boundary microphone is located by the Astatic logo in the cut out section of the microphone bezel. The mic features an omnidirectional (half hemisphere above mounting surface) pickup which is useful when a directional pattern is not desired. No special orientation is required when mounting the 202R.

FEATURES

For teleconferencing or voice-lift sound reinforcement in meeting spaces, surveillance and ambient recording or audio observation
RF resistant design
Low-profile mounting in panels, table tops, walls or ceilings
12dB/octave bass roll-off @ 100Hz for elimination of unwanted thumping or rumbling low frequencies
Hemi omni pick-up pattern
Dual-surface and bottom shock isolation bushings
Low noise transformerless electronics design
13/16" (20mm) threaded diameter with mounting hardware
SPECIFICATIONS
Operating Principle: Electret Condenser
Polar Pattern: Omnidirectional
Frequency Response: 80Hz - 10kHz
Sensitivity: -30dBV (32mV) @ 1Pa
Impedance: 150ohms
Self Noise: 26dBA
Max SPL: 125dB, 1% THD
Connector: 3 pin male XLR type
Phasing: Positive pressure on diaphragm generates a positive voltage on pin 2 relative to pin 3
Finish: Durable urethane
Net Weight: 2.3 oz. (65 grams)
RF Immunity: Exceeds ENT55103-2, E1, E2, E3 and E4
Power Requirements: P12, P24, P48, 2.4 mA
RoHS Compliant
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.