Skip to main content Skip to footer

Ashdown ABM 500 EVO III 575W Bass Amp Head

Item #: 
1304634500156581709
  • Write a Review

The Ashdown ABM 500 EVO III is a 575W RMS bass amp head with plenty of power and unique, footswitchable tone controls. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz,... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Ashdown ABM 500 EVO III is a 575W RMS bass amp head with plenty of power and unique, footswitchable tone controls. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz, and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favorite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual-triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones.

Also footswitchable is the onboard compressor and the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM 500 EVO III head features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. Its new upgraded power section has faster transient attack, more headroom and even less noise.

FEATURES

575W RMS output
Extensive, footswitchable EQ section with three rotary controls plus two pairs of additional sliders
Switchable active/passive input
Solid state and dual-triode tube preamps, selectable by footswitch
Footswitchable compressor and Ashdown sub-harmonic generator
Front-panel balanced DI out with pre/post-EQ switching
Sub-bass and tuner outputs
Effects loop
Line input
Upgraded power section with faster transient attack, more headroom, and less noise
SPECIFICATIONS
Frequency Response: -3dB at 17Hz and 30kHz
Speaker Outputs: Minimum impedance 4 Ohms
High Instrument Input: Impedance 3.9m Ohms, input range 150mV - 20mV p-p
Low Instrument Input: Impedance 10k Ohms, input range 300mV - 40V p-p
Line Input: Impedance 22k Ohms, input level 0dBu nominal
Sub Output: Impedance 1k Ohms, level 0dBu Nominal
DI Output: 600 Ohms balanced, level 0dBu nominal
Tuner Output: Impedance 22k Ohms, level 0dBu nominal

EQ:
Bass +/-15dB @ 45Hz
Middle +/-15dB @ 660Hz
Treble +/-15dB @ 7kHz shelving
Slider 1 +/-15dB @ 180Hz
Slider 2 +/-15dB @ 340Hz
Slider 3 +/-15dB @ 1.3kHz
Slider 4 +/-15dB @ 2.6kHz
Shape (Push Flat) +8dB @ 50Hz & 4kHz, -8dB @ 400Hz, filter slope - 6dB/octave
Effects Send Impedance 22k Ohms, level 0dBu nominal
Effects Return Impedance 22k Ohms, input level 0dBu Nominal
18-3/4"W x 5-1/4"H x 12-1/2"D
31 lb.
Pro Coverage
MANUFACTURER'S WARRANTY
Limited 1 year warranty on all amps.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.