Ashdown ABM-2000 EVO III 2000W Bass Amp Head  

Item #: 
1342315540077719757
  • Write a Review

The most powerful Ashdown ever! The new ABM 2000 head pairs the much loved ABM Evo 3 pre amp with two monstrously powerful Class D power sections resulting in a huge increase in power coupled with a d... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The most powerful Ashdown ever! The new ABM 2000 head pairs the much loved ABM Evo 3 pre amp with two monstrously powerful Class D power sections resulting in a huge increase in power coupled with a dramatic reduction in weight. Whilst the same size as an ABM 900 head the ABM 2000 produces 2000 watts RMS into two 4 ohm/4 x 8 ohm outputs(4000 watts peak).

The ABM 2000 EVO III is a 1000+1000 watts RMS bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones.

Also footswitchable is the on-board compressor and the mighty Ashdown sub-harmonic generator that precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM 2000 EVO III features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A new upgraded power section has faster transient attack, more headroom and even less noise.

Features
  • Valve Drive
  • 7-band EQ
  • Built-in Sub-Harmonics
  • On-board compressor
  • 1 X 12AX7 Preamp tubes
  • 2000W
Specifications
  • -3DB At 17HZ and 30KHZ frequency response
  • SpeakOn/Jack speaker outputs
  • High Instrument Input: Impedence 3.9M OHMS
  • Low Instrument Input: Impedence 10K OHMS
  • Line Input: Impedence 22K OHMS
  • Line Output: Impedence 10K OHMS
  • DI Output: 600 OHMS Balanced
  • Tuner Output: Impedence 1K OHMS
  • Impedance: Minimum 4 OHMS
  • Effects Send: Impedence 22K OHMS
  • Effects Return: Impedence 22K OHMS
  • W x H x D: 24.01" x 6.22" x 13.97"
  • Weight: 39.46 lb.
Warranty
MANUFACTURER'S WARRANTY
Limited 1 year warranty on all amps.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.