Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Applied Microphone Technology AMT S25B Acoustic Bass Microphone with AP40 Preamp and side mounting
Use Add to Cart below to have it shipped to you, or to a store near you.
Close
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store

Solves all acoustic bass miking problems.

The S25B is an electret-condenser microphone that has been designed for acoustic bass. All of the parameters that are problematic for the double bass have been addressed. To be able to get the most gain before feedback it uses a very tight pattern to give a high rejection to surrounding noise, at the same time reproducing accurately the subtleties of the bass. As placement is especially important with an instrument that has a fine finish and varying dimensions, the S25B microphone's attachment mechanism is designed to secure the mic to the bass in different positions taking seconds to attach. This mechanism is fitted with natural soft suede so as not to mark or mar instrument.

Made from aluminum to keep the mass low yet extremely strong, this AMT microphone will remain durable through many years of use. The flex arm is easy to position yet retains it's placement throughout the most active of performances. The mic has an LED that can be easily seen while performing. This indicates status of a battery or phantom power.

The preamp for the S25B microphone is rugged anodized aviation aluminum, which houses the electronics that can be placed on the floor. This preamp utilizes a circuit that can change EQ, curve, and gain by exchanging EPROM-like chip. The preamp runs off battery or phantom power. The output is terminated with a male XLR type connector for balanced use. The mic is connected to the preamp by a 4-pin locking connector.

Applied Microphone Technology AMT S25B Acoustic Bass Microphone with AP40 Preamp and side mounting Features:

  • Condenser microphone designed for acoustic bass
    Flexible arm for optimal placement
    High rejection to surrounding noise
    Rugged anodized aviation aluminum construction
    Floor preamp with xlr output
    Runs off of battery or phantom power
    Includes hardshell blo-mold protective case


Applied Microphone Technology AMT S25B Acoustic Bass Microphone with AP40 Preamp and side mounting Specifications:

  • Element: Condenser
    Polar Pattern: Cardioid
    Frequency: 30Hz - 10kHz
    Sensitivity: -65dB+ 4dB
    Impedance: 150 Ohms
    Phantom Power: 12 to 52 vDC Self-powered battery
    Max input SPL: 120 dB
    Dimension 10" Flex Arm Mechanism Opens min 5" to max 11 7/8", Cable 10'
    Weight Mic only: 71 grams


Voice your opinion! Be the first to review »
Questions about the AMT S25B Acoustic Bass Microphone with AP40 Preamp and side mounting (270995)


To: GuitarCenter.com
PO Box 4769
Westlake Village, CA 91359
USA
866-498-7882
 
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
*Email:
Phone:
*Subject:
*Message:
Click to add file attachment
File Upload 5mb limit