Skip to main content

Ampeg SVT-210HE Classic Series Bass Cabinet  

Item #: 
1274741957294119694
  • Write a Review

The SVT-210HE Classic Series Bass Cabinet delivers solid Ampeg sonics for that classic, punchy bass sound. It features two Ampeg 10" drivers and a high-frequency tweeter with variable high-frequency l... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The SVT-210HE Classic Series Bass Cabinet delivers solid Ampeg sonics for that classic, punchy bass sound. It features two Ampeg 10" drivers and a high-frequency tweeter with variable high-frequency level control and a protection circuit for the tweeter. It has dual Neutrik Speakon and 1/4' input/output jacks.

The world-renowned Ampeg Classic Series Cabinets are synonymous with bass enclosures and the sound they are expected to produce. And because Ampeg knows different players have different tastes, they make the configuration you are looking for. From the undeniable tone of the SVT-810E to the unexpected low end of the extended range SVT-410HLF, Ampeg enclosures have set the standard for decades.

Features
  • 2 x 10" Drivers
  • Horn
  • Variable High Frequency Level
  • High Frequency Protection
  • Bass Reflex Cabinet Design
Specifications
    • Dimensions: 18"W x 24"H x 16"D
    • Weight: 60 lbs.
    • Component 1: Magnet Weight: 30 oz
    • Component 1: Size: 2 x 10"
    • Component 1: Voice Coil: 2"
    • Component 2: Magnet Weight: 8 oz
    • Component 2: Size: Horn/Driver
    • Component 2: Voice Coil: 1"
    • Crossover Frequency: 4kHz
    • Frequency Response (-3 dB): 50Hz-18kHz
    • Maximum SPL: 119dB
    • Nominal Impedance: 8 Ohms
    • Program Handling: 400W
    • RMS Handling: 200W
    • Sensitivity: 97dB
Warranty
MANUFACTURER'S WARRANTY
On May 1st, 2009, the Mackie, TAPCO, Crate, Blackheart and Ampeg websites will be updated with the addition of warranty URLs (e.g. www.mackie.com/warranty) expressing new A Stock warranty terms. These warranty URLs will go live on May 1st, 2009. Formerly, warranty periods for these LOUD brands appeared in a variety of locations – in product manuals (for Mackie and TAPCO) and on warranty cards and hang tags (for Crate, Blackheart and Ampeg). In order to streamline and clarify this process, Mackie, TAPCO, Crate, Blackheart and Ampeg warranty periods and terms will be communicated in full on the warranty pages. Any LOUD products purchased prior to May 1st will bear with them the manufacturer’s warranty as predates the new policy. Moving through this transition, in order for customers to obtain warranty service, both the sales receipt and a physical copy of the (older) warranty statement will be required by our Service and Support departments in order to issue Service Requests, etc. If the product was purchased on or after May 1st, 2009, but a physical copy of the older warranty terms is not presented, the new warranty terms and periods will apply. Meanwhile, the products that bear with them the new warranty periods (as reflected in the box contents of each product) are being tracked by serial #, and contain new warranty content referring customers to the appropriate brand website. The information below reflects the product warranty periods that will be effective on May 1st, 2009 for the Mackie, TAPCO, Crate, Blackheart and Ampeg brands: Mackie: A 3-year, nontransferable, inclusive warranty on electronics and a 2-year, nontransferable, inclusive warranty on drivers (where applicable) apply to loudspeakers (active and passive), power amps, powered mixers, and HR studio monitors. Specific models under this warranty include all SRM, HD, SA, C and S Series Speakers, all FRS Amplifiers, all HRmk2 Studio Monitors. A 1-year, all inclusive, nontransferable warranty applies to all mixers, MR Studio Monitors, Control Surfaces, Processors (digital), MR Studio Monitors, Control Surfaces, Audio/MIDI Interfaces, other SR & Recording Products. Specific product models under this warranty include all Onyx Compact, 4-bus and 8-bus, all VLZ3, all PPM, all ProFX, all CFXmk2 Mixers, all MR Studio Monitors, Big Knob, Onyx 800R, all MCU Pro family. Tapco: A 1-year, all inclusive, nontransferable warranty applies to all products and all models. Crate: A 1-year, nontransferable warranty applies to electronics and speakers on all models of MI amps, cabinets, and combos. 90-day warranty on all tubes Blackheart: A 1-year, nontransferable warranty applies to electronics and speakers on all models of MI amps, cabinets, and combos. 90-day warranty on tubes. Ampeg: A 5-year, nontransferable warranty on electronics and a 2-year, nontransferable warranty on speakers apply to all SVT Classic and Pro Series, MI amps and cabinets. A 2-year, nontransferable warranty on electronics and a 2-year, nontransferable warranty on speakers apply to all B Series, all Diamond Blue, and all BA combo amps. 90-day warranty on tubes.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
AmpegSVT-210HE Classic Series Bass Cabinet
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to Top

 
5.0

Awesome on top of my 410

By slaytanicxreign

from New York

Comments about Ampeg SVT-210HE Classic Series Bass Cabinet:

This 210 is AWESOME on top of my 410HE cab, it seems like it tripled my power and volume!! It really gave me that extra punch I was wishing to achieve! It also saved me 500 dollars, I didnt have to upgrade to a 610 or 810 just to get that extra push!!

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.