The American DJ PRO38B RC is a high-output black PAR Can with 12 1W LEDs that is ideal for lighting up stages, dance floors, and entertainment venues. The fixture's RGB color mixing allows users to ge... Click To Read More About This Product
The American DJ PRO38B RC is a high-output black PAR Can with 12 1W LEDs that is ideal for lighting up stages, dance floors, and entertainment venues. The fixture's RGB color mixing allows users to get a full spectrum of color from one PAR Can. The PRO38B RC also features an Infrared wireless remote to control what would normally require a DMX controller or adjustments made by hand on the rear panel. Aim the wireless remote at the unit and control features such as: Black Out, built-in programs, flash, DMX addressing, and RGB color change.
This fixture uses LEDs rated at 50,000 hours with a maximum power draw of 15W. DMX addressing may also be changed by the unit's 3-button LED display. The PRO38B RC has a dual hanging bracket that makes it easy to set on the floor if you want.
Black ultra bright PAR 38 with 12x 1W LEDs (4 Red, 4 Green, & 4 Blue LEDs)
Great for performance stages where traditional PAR Cans emit a lot of heat onto performers
Includes wireless infrared remote control up to 15"/4.5m (Model: ADJ LED RC)
7 DMX Channel modes: 1-, 2-, 3-, 4-, 5-, 6- or 7-channel modes
6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode, and DMX-512 Mode
Smooth RGB color mixing (fast or slow color change operation)
Flicker-free operation for film and television
32 built-in color macros
Color strobe effect
Electronic dimming: 0 - 100%
Beam angle: 30
Linkable via 3-pin XLR cable (In/Out)
3-button LED display on rear panel
Dual bracket system allows fixture to be hung or set on the ground
Power Draw: 15W max.
ETL & ETLC approved
Run all night with no duty cycle
ADJ LED RC Infrared Remote Control:
Black Out: Turns fixture On/Off
Auto Run: Automatically run through built-in programs
Program Selection: Access units built-in programs
Flash: Strobe effect
Speed: Control speed of Auto Run
DMX Mode Select
Sound Active: Activates sound active mode
Slave: Designates the fixture as a "slave" fixture in the Master/Slave configuration
Set Address: Set DMX Address on a fixture
RGB Buttons: Adjust RGB colors with the "+" and "-" buttons
+ and “ Buttons: Adjust flash rate, speed of the Auto Run and Program Selection
Long Life LEDs (50,000hrs.)
Multi-voltage: 120-240V, 50/60Hz
Dimensions (LxWxH): 7.25" x 7.25" x 9.5"/ 185mm x 185mm x 240mm
Weight: 4lb. / 1.5kg.
Specifications subject to change without notice.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.