The LS-80 LED System from American DJ is a great all-in-one PAR can system for any mobile entertainer. It includes 4 PAR can lamps, a T20F chase controller with a T20FC footswitch, and a light stand.T... Click To Read More About This Product
The LS-80 LED System from American DJ is a great all-in-one PAR can system for any mobile entertainer. It includes 4 PAR can lamps, a T20F chase controller with a T20FC footswitch, and a light stand.
The four LED PAR cans included in this popular American DJ lighting system vary in color: one red, one green, one blue, and one amber. Each PAR can uses 12 x 1W LEDs producing bright color washes of light and is rated at an extremely long 50,000 hour life. You also get a sturdy light stand which can extend up to 10 feet that has plenty of room to hold all 4 lamps.
The LS-80 LED System uses the T20F chase/foot control system allowing you to operate this easy-to-use chase controller either from the T20F controller itself or via the T20FC footswitch. The T20F features 20 built-in programs”10 normal chase programs and 10 chase programs with fade time”7 pre-set scenes, black out, plus master/slave and DMX operation.
Great for any performer on the go, the American DJ LS-80 LED Lighting System is easy to set-up and take down. Plus, with low heat emitting LEDs performers stay cooler on stage.
4x PAR 38 polish PAR Cans (1x Red, 1x Green, 1x Blue, 1x Amber)
1x T20F Chase Controller system with foot control
1x Light Stand (extends up to 10 feet/3M)
4-channel chase control pack (Four 3-prong Edison sockets)
Great for the working musician or DJ
DMX, 3-pin, XLR In/Out for linking to other T20Fs
20 built-in programs: 10 normal chase programs and 10 chase programs with fade time
7 preset scenes (holding the "Stand By" button down for 3 seconds):
Scene 1 = Channel 1 on
Scene 2 = Channel 2 on
Scene 3 = Channel 3 on
Scene 4 = Channel 4 on
Scene 5 = Channel 1 and 3 on
Scene 6 = Channel 2 and 4 on
Scene 7 = All on
Stand By function (Blackout)
Chase button to select from the 20 built in chases
Master/Slave and DMX operation modes
Chase by way of Audio (sound activation) or 3 preset chase speeds
Circuit breaker protection
Built-in, reversible, hanging/truss bracket
T20FC Foot Controller features:
Chase selection footswitch
Stand By (Blackout) footswitch
PAR Can Specifications
Each PAR Can has 12x 1W LEDs rated at 50,000 hr. life
25-degree beam angle
Power Consumption: 70W max total system (120V)
Power plug and chase controller power input will vary depending on country or region
Dimensions (each): 7"W x 8.75"H x 7"D
Max Load: 5A per channel or 15A max
Voltage: 120VAC / 60Hz
T20FC Foot Controller
Unit Weight: 4 lb.
Reviewed by 2 customers
Displaying reviews 1-2
We got 2 sets of these just in time for a club gig where there were no house lights. These were lifesavers, not only during the gig, but for set-up and break-down as well - since the club was very, very dark. For years we've been using Par cans and the heat was unbearable. These cans are cool as can be. We leave one set on the stand, the other set spread out around the stage in any location we want - as fire is not an issue anymore. My only beef is the lack-luster instructions. We're still having trouble mastering the sound-activation function and the sequences are pretty blah. But, our intention is to use these simply as stage wash - so they'll do just fine. I would recommend these lights for any band on a budget.
Was looking for an inexpensive set of lights that would give good lighting. These lights fit the bill perfectly w/ no heat and superb lighting. Only one problem, I used them three times and the blue can stopped working. I have called AM DJ and they have given me an RA # for an exchange of that can. Found out that they have a 3-year guarantee. Cool. The aluminum is light and a little flimsy. I would recommend a case for protection.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.