Alto TMX200DFX 20-Channel Powered Mixer with Effects  

Item #: 
1362178926569751735
  • Write a Review

Live performances are more than just a job. They are an experience for the performers, the audience and for the sound engineer. The Alto TMX200DFX was engineered to precise specifications to deliver t... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

Live performances are more than just a job. They are an experience for the performers, the audience and for the sound engineer. The Alto TMX200DFX was engineered to precise specifications to deliver the kind of performance you demand, while giving you everything you need to create an unforgettable experience.

The TMX200DFX is loaded with all the connections you need including 38 total inputs comprising 16 XLR jacks with phantom power, 20 Line jacks and stereo RCA. These low-noise channels are your best friend when connecting instruments, mics, or even your iPod for playing between sets. Even better, each mono and stereo channel has its own 3-shelf EQ, so you can dial in every nuance you need in seconds. A/D and D/A conversion is performed with 24-bit precision. Easy-to-view knobs with incredibly smooth movement make mixing feel like playing a fine instrument.a

The TMX200DFX's on-board Alesis digital effects processor provides 24-bit, ultra-clean digital effects including Large Hall, Medium Hall, Large Room, Medium Room, Karaoke, Short Spring Reverb, Long Spring Reverb, Chamber, Mono Delay, Mono Echo,Stereo Echo, Flanger, Chorus, Reverb + Chorus, Reverb + Delay and Thickener.

It comes standard with the ability to deliver ultra-clean power at 2 x 750W (4-ohms) or 1500W (8-ohms bridged). Fortunately, all that power isn't as heavy as you might expect. Weighing in at less than 28 pounds, the TMX160DFX is a winner in the power-to-weight class.

Features
  • 38 total inputs including 16 XLR jacks with phantom power, 20 Line jacks and stereo RCA
  • On-board digital effects processor and 3-shelf EQ on each mono and stereo channel
  • Continuous 2 x 750 Watts at 4 ? + 2 x 500 Watts at 4 ?; 1500 W at 8 ? bridged + 1000 Watts at 8 ? bridged
Specifications
  • Input channels
    Microphone Input: Electronically Balanced
    Frequency Response: 20Hz to 20kHz, +/-1dB
    Distortion (THD&N): ?0.03% at 0 dBu, 1 kHz
    Gain range 0 dB to 45 dB (Mic)
    SNR (Signal-to-Noise Ratio): 115 dB
    Line input
    Electronically Balanced (Unbalanced)
    Frequency Response: 20 Hz to 20 kHz, +/-1 dB
    Distortion (THD&N): ?0.03% at 0dBu, 1 kHz
    Gain range: -15 dBu to 30 dBu
    Impedance Microphone Input: 1.4 kOhms
    Channel Insert return: 2.5 kOhms
    All Other Input: 10 kOhms or Greater
    Tape Out: 1 kOhms
    All Other Outputs: 120 Ohms
    Equalization
    Hi Shelving: ±15 dB @ 12 kHz
    Mid bell: ±12 dB @ 100 Hz 8 kHz
    Low shelving: ±15 dB @ 80 Hz
    MAIN EQ 9 EQ: (63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz) ±15 dB
    DSP Section A/D and D/A Converters 24-bit
    DSP Resolution 24-bit
    Type of effects
    Large Hall, Medium Hall, Large Room, Medium Room, Karaoke, Short Spring Reverb, Long Spring Reverb, Chamber, Mono Delay, Mono Echo, Stereo Echo, Flanger, Chorus, Reverb + Chorus, Reverb + Delay, Thickener
    Presets 16
    Controls 16-posistion preset selector
    Clip LED
    Mute Switch with Peak LED Indicator
    Main Mix Section Noise (Bus noise)
    Fader 0 dB, Channels muted: -90 dBr (ref.: +4 dBu)
    Fader 0 dB, All input channels assigned and set to Unity Gain: -88 dBr (ref.: +4 dBu)
    Power Consumption Stereo mode
    2 x 750 W @ 4 ohm (EIAJ) 2 x 520 W @ 4 ohm (RMS)
    Bridge mode
    1500 W @ 8 ohm (EIAJ)
    Phantom Power (Mic Pin 2 / Pin 3 and Pin 1): 47 ±2 V
    Power supply Main voltage 115 V / 230 V
    Dimensions (WxLxH): 565mm x 555mm x 145mm
    Weight: 27.6 lb
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.