Skip to main content

Alto RMX508DFX 500W Powered Mixer with Effects

Item #: 
1372462153194765417
  • Write a Review

The EMPIRE RMX508DFX is a 500W powered mixer with effects and EQ that includes everything you need to tackle virtually any live performance. It starts with an ultra-clean 500 watts of Class D power to... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The EMPIRE RMX508DFX is a 500W powered mixer with effects and EQ that includes everything you need to tackle virtually any live performance. It starts with an ultra-clean 500 watts of Class D power to drive your speakers of choice. Class D amplification makes the RMX508DFX not only powerful but incredibly light compared to other solutions. Running the RMX508DFX in stereo will deliver a continuous 2 x 250W at 4 ohms of pure, clean power.

The RMX508DFX features 18 total inputs including eight XLR jacks with phantom power, eight line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX508DFX.

Once everything is connected, there's a full onboard digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in Alesis DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger combinations. 256 different Alesis DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.

FEATURES

18 total inputs including eight XLR jacks with phantom power, eight line jacks and stereo RCA
On-board digital effects processor and 3-shelf EQ on each mono and stereo channel
Continuous 2 x 250W power at 4 ohms; 500W at 8 ohms Bridged
Class D Power for clean power and lightweight
Built-in, recessed handles for easy transport
SPECIFICATIONS
Mono input channels
Microphone input: Electronically balanced, discrete input configuration
Frequency response: 10Hz to 55kHz, +/“3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Gain: 50dB (MIC)
SNR: (Signal to Noise Ratio) >90dB

Line input: Electronically balanced
Frequency response: 10Hz to 55kHz, +/“3dB
Distortion: (THD & N) 0.04% at +4dBu, 1kHz
Gain: 30dB
Stereo input channels
Line input: Unbalanced
Frequency response: 10Hz to 55kHz, +/“3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Impedances
Microphone input: 1.4kOhm
Channel Insert return: 2.5kOhm
All other inputs: 10kOhm or greater
Tape out: 1kOhm
All other output: 120Ohm
Equalization
Hi shelving: +/“15dB @12kHz
Mid bell: +/“15dB @2.5kHz
Low shelving: +/“15dB @ 80Hz
Alesis DSP Section
A/D and D/A converters: 24-bit
DSP resolution: 24-bit

Type of effects
Hall, Room, Vocal & Plate REVERBS
Mono & Stereo DELAY (max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
REVERB+DELAY, REVERB+CHORUS,
REVERB+FLANGER combinations
Presets: 256
Controls: 16-position PRESET Selector;16-position VARIATION selector
CLIP LED; MUTE SWITCH with LED indicator
UNITY gain:“71dBr (ref.:+4dBu)
Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
AUX Sends max out: +22dBu

Power supply Main voltage
100-120VAC 60Hz
220-240VAC 50Hz
Fuse 100 120V : T6.3AL
210 240V : T3.15AL

Stereo mode
230 W @ 4 ohm(RMS) THD=1%
150 W @ 8 ohm(RMS) THD=1%
Bridge mode 460 W @ 8 ohm(RMS) THD=1%

Physical Dimension (W—D—H) 550mm — 220mm — 310mm(8.66" — 12.20" — 21.65")
Weight: 28.7lb.
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.