The APX1500 brings dependable, continuous, clean stereo power to any live performance. If you are a sound contractor, gigging musician or live sound engineer in need of a strong amp that provides cons... Click To Read More About This Product
Find a similar product below or contact us for a recommendation of a great alternative.
Call: 866-498-7882 Email
The APX1500 brings dependable, continuous, clean stereo power to any live performance. If you are a sound contractor, gigging musician or live sound engineer in need of a strong amp that provides consistently clean power, the APX1500 is perfect. The APX1500 provides 2 x 350 at 8ohms, or 2 x 550 at 4ohms. In bridged mono mode, the APX1500 pumps out 1500 crystal-clear watts of power. Because it is class D, you get all the purity reliability of a professional amp without breaking your back just to lift it. Weighing in at only 12.1lb., the APX1500 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application.
Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced, combo 1/4 XLR inputs, "touch-proof" binding posts and speak-on jacks make connecting the APX1500 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1500's level and clip indicators are designed to keep you informed of performance levels at a glance.
The APX1500 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1500 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.
1500 watts at 8Î bridged mono
2 x 550 watts at 4Î; 2 x 350 watts at 8Î
Efficient Class D power
Balanced combo input jacks
Lightweight, two rack-space design
Easy-to-read LED level and clip indicators
Low pass filter
Low-noise cooling fans
Continuous power (20 Hz “ 20 kHz):
Both channels driven: 2 x 540W at 4ohms, 2 x 340W at 8ohms (0.5% THD); 2 x 750W at 4ohms, 2 x 370W at 8ohms (1.0% THD EIAJ)
Bridged mono mode: 1 x 1500W at 8ohms, 1 x 740W at 16ohms
Input Sensitivity: 1.0V
Input Impedance: 10K Unbalanced
Frequency Response: (at 10dB below rated output power) 20Hz - 25kHz (+0/-3dB)
Voltage Gain: 32dB
Distortion: (SMPTE-1M) <0.5%
S/N Ratio: 110dB
Protection: On/Off, mute, DC-fault, load
Controls Front: AC power switch, 2 channel level control; “ˆž to +30dB
Controls Rear: 30Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / 1/4 combo
Output: Touch-proof binding posts and Speakon NL4 connectors
Power Supply: AC Power: 100VAC, or 110 “ 120VAC or 220 - 240VAC (50 / 60Hz)
Dimensions (WxLxH): 19" x 11.2" x 3.5"
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.