Alto 600 Watt Portable Powered PA System  

Item #: 
  • Write a Review

Open the Mixpack and discover a full-featured, on-the-go PA system. In addition to the 6-channel mixer, your Mixpack contains a 12" subwoofer and two satellite speaker cabinets, all driven by 600 watt... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products

Open the Mixpack and discover a full-featured, on-the-go PA system. In addition to the 6-channel mixer, your Mixpack contains a 12" subwoofer and two satellite speaker cabinets, all driven by 600 watts of pure Class AB power.

Versatility and Mobility
Mixpack features a 6-channel mixer. Inputs include XLR, line, and RCA jacks so you can connect any audio source, from musical instruments to microphones to an iPod. Each channel features a 3-band EQ for shaping the tone. In addition, sixteen onboard Alesis-driven effects add a professional finishing touch to your sound. And no matter where your music takes you, Mixpack sets up in minutes”without sacrificing quality or power.

Pump it Up
Living inside the Mixpack are 600 watts of pure Class AB power. The 12" subwoofer produces a smooth rich bass. Two satellite cabinets deliver clean mids and highs. Each cabinet is home to a pair of 6.5" drivers and a 1" tweeter. Includes stands, so you can place the sound where you need it most.

  • 600-watt portable sub/satellite PA system
  • 12" subwoofer plus two satellites with 2 x 6.5" and 1 x 1.0" speakers
  • 6-channel mixer with 3-band per channel EQ
  • XLR, Line, and RCA inputs
  • 24-bit Alesis DSP with 16 total effects
  • Type: 3-Way Powered System Bi-Amp plus passive crossover into Satellite
    Low Output Power: 150W RMS Class AB
    MID-HIGH-Output Power: 75W + 75W RMS Class AB
    Peak Power Rating: 600 watts peak
    Maximum SPL @ 1m 116.5dB Continuous: - 119.5dB Peak (calculated)
    Frequency Response: 55Hz - 20kHz @ -10dB
    Impedance: Low-Mid / High Low 8 ohm - Mid / high 8 Ohm
    Crossover Frequencies: Active 125Hz at 12dB / Oct - Passive 3000Hz at 12dB / Oct with Electronic Dynamic Protections
    Amplifier Protections: Low-Mid / High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30Hz - 24dB / Oct - Limiter / Compressor
    Low Frequency Device: 12" / 318 mm - 2" Voice Coil
    Mid Frequency Device: 4—6.5" / 165 mm - 1.5" Voice Coil
    High Frequency Device: 2 — 1" Compression Driver - 1" Voice Coil
    Horn Coverage: H — V 80H — 80V
    Enclosure: Plastic Reinforced Cabinet Polypropylene
    MIXER Section
    Microphone Input: Electronically balanced discrete input configuration
    Frequency Response: 10Hz to 55KHz +/-3dB
    Distortion: (THD&N) 0.04% at +4dBu 1KHz
    Gain: 35dB
    SNR: (Signal to noise ratio) >94dB
    Line input: Electronically balanced
    Frequency Response: 10Hz to 55kHz +/-3dB
    Distortion: (THD&N) 0.04% at +4dBu 1kHz
    Gain: 15dB
    Stereo Input / Output
    Line input: Unbalanced
    Frequency Response: 10Hz to 55kHz +/-3dB
    Distortion: (THD&N) 0.04% at +4 dBu 1kHz
    Microphone Input: 1.4 kÎ
    Channel insert return: 2.5 kÎ
    All other inputs: 10 kÎ or greater
    Tape out: 1 kÎ
    All other outputs: 120Î
    Hi shelving: ±15dB @ 12kHz
    Mid bell: ±15dB @ 2.5kHz
    Low shelving: ±15dB @ 80Hz
    DSP section
    A/D and D/A converters: 24-bit
    DSP resolution: 24-bit
    Type of effects: Reverbs, Stereo, Delay, Chorus, Reverb + Delay and Reverb + Chorus combinations
    Presets: 16
    Controls & Monitoring
    16-position preset selector
    Clip LED
    Mute Switch with LED indicator
    Main Mix Section
    Noise (Bus noise)
    Fader 0dB channels muted: -89dBu
    Fader 0dB all input channels assigned and set to unity gain: -85dBu
    Max output: 27dBu balanced
    Controls: 22 dBu balanced 1/4" jacks
    AUX Sends: Max out 22dBu
    Power Supply: AC - 220 / 240V or AC - 100 / 120Volt, with Switching Power Mode
    Dimensions (WxLxH): 1060mm x 700mm x 700mm
    Weight: 94.8lb.
  • Customer Reviews

Review Snapshot

by PowerReviews
Alto600 Watt Portable Powered PA System

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to Top


Alto 600 Watt Portable Powered PA System

By Carlos gonzalez

from PR/USA

Comments about Alto 600 Watt Portable Powered PA System:

his is a fantastic PA system in the portable battery powered category.The sound output is excellent and it drew attention from people on how it was powered. Using this unit outdoors playing with guitar and a CD backtrack, I walked around with a long patch cord and at 30 feet away, the sound was superb. built solid / top quality.RCA hookups for AUX IN are a huge plus. Much better than 1/8? input jacks that you see on other company brands. You can also adjust your auxiliary input for bass & treble. Another huge plus! I achieved perfect backtrack sound utilizing a small CD player with decent volume from the headphone jack. So basically it was CD headphone out on a 1/8? stereo jack, then split to RCA jacks to the back panel . (You won?t get high output or sound quality if you plan to use a small MP3 iPod). Utilizing the controls correctly and it has great bottom end and sparkling highs.Takes I can travel outdoors now without searching for an AC wall outlet. Perfect for the soloist. Alto certainly optimized the technology for sound output.A very fine product.

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.