The Allen & Heath PA 12-CP Powered Mixer has 8 mono channels with mic (XLR) and line (TRS) inputs. 2x500W RMS peak power professional class, fan-cooled, circuit-protected AB power amplifiers with the ... Read More
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Allen & Heath PA 12-CP Powered Mixer has 8 mono channels with mic (XLR) and line (TRS) inputs. 2x500W RMS peak power professional class, fan-cooled, circuit-protected AB power amplifiers with the same output into 4 or 8 ohms. Individual +48V phantom power switches, 4-band EQ, 60Hz low and 12kHz high shelving with swept high/middle and 250Hz low/middle. 2 stereo channels with 2 unbalanced stereo inputs on each. 4 AUX sends from each channel with faders. Multiple stereo and mono mix outs, output EQ, pro-level digital FX, and powerful master section.
8 mono channels with mic (XLR) and line (TRS) inputs
Line input overrides the XLR input
2X500W RMS peak power professional class, fan-cooled, circuit-protected AB power amplifiers
Individual +48V phantom power switches are provided
New padless 2-stage preamp with smooth gain law Line input goes to second stage for better matching and performance
Switched 100Hz high pass filter
4-band semi-parametric EQ
4 aux mixes
Mute with LED
PFL button with LED that functions as peak indicator
0dBu = 0.775 Volts rms 0dBV = 1 Volt rms Maximum output level: TRS +21dBu into 2kOhm load Nominal output level: L-R +0dBu into 600 ohm max load; Other o/p's +0dBu into 2kOhm max load Internal headroom: Mix to o/p +21dB. Channels+21dB Peak LEDs: 5dB before clipping Noise: measured rms 22Hz to 22kHz. Mic EIN ref 150 ohm source -128dB. L-Rresidual <-89dBu (nothing routed). L-R mix <-85dBu (channels routed) Frequency response: 20Hz to 30kHz +/- 0.5dB THD: +10dbu, 1kHz Channel to mix o/p <0.006% Crosstalk:: - 1kHz, Ch to ch <-90dB, Chl mute shutoff<-95dB, Ch fader shutoff <-95dB Power Amp: Outputpower Constant Power switchable. = 2 x 500w RMS into 4 ohm. = 2 x 500wRMS into 8 ohm. Frequency response THD+N <0.02%@1kHz MainsPower: Internal unit, linear regulated Internally wired to requiredcountry voltage AC mains input 100V to 240V AC@50/60Hz Powerconsumption 1600W max Mains fuse rating 100-120V AC use T10A 20mm 220-240V AC use T8A 20mm 20-3/5"W x 7"H x 21-1/5"D 46 lbs.
One year parts and labor warranty.
This is great powered mixer. We use it in a small band application with 2 Mackie passive speakers and 2 Yamaha monitors. The slides and pots are increadable to work with. Very little movement and you are there! Paid $850.00 shipped. Spend a few extra bucks and buy this, forget about the Yamaha & Mackie mixers. Allen & Heath Mixers are very user friendly. The effects are increadably good.
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the