16 channels, big punch, and an amazing feature set.

The Allen & Heath PA 20-CP Powered Mixer has 16 mono channels with mic (XLR) and line (TRS) inputs. 2 x 500W RMS peak power professional class, fan-cooled, circuit-protected AB power amplifiers built in with same output into 4 or 8 ohms. Individual +48V phantom power switches, 4-band EQ, 60Hz low and 12kHz high shelving with swept high/middle and 250Hz low/middle. 2 stereo channels with 2 unbalanced stereo inputs on each. 4 AUX sends from each channel with faders. Multiple stereo and mono mix outs, output EQ, pro-level digital FX, and powerful master section.

Allen & Heath PA 20-CP Powered Mixer Features:

16 mono channels with mic XLR and line TRS inputs
2 x 500W RMS peak power professional class, fan-cooled, circuit-protected AB power amplifiers
Line input overrides the XLR input
2 stereo channel inputs
Individual +48V phantom power switches are provided
Line input goes to second stage for better matching and performance
Switched 100Hz high pass filter
Insert point
4 band EQ
4 aux mixes
Mute with LED
PFL button with LED that functions as peak indicator
100mm faders
16-program digital FX processor provides reverbs, delays, chorus and others, including combined

Allen & Heath PA 20-CP Powered Mixer Specifications:

0dBu = 0.775 Volts rms 0dBV = 1 Volt rms
Maximum output level: TRS +21dBu into 2k ohm load
Nominal output level: L-R +0dBu into 600ohm max load
Other o/p's +0dBu into 2kOhm max load
Internal headroom: Mix to o/p +21dB. Channels+21dB
Peak LEDs: 5dB before clipping
Noise: measured rms 22Hz to 22kHz
Mic EIN ref 150 ohm source -128dB
L-Residual <-89dBu (nothing routed)
L-R mix <-85dBu (channels routed)
Frequency response: 20Hz to 30kHz +/- 0.5dB
THD +10dbu, 1kHz
Channel to mix o/p <0.006%
Crosstalk - 1kHz
Ch to ch <-90dB
Chl mute shutoff<-95dB
Ch fader shutoff <-95dB
Power Amp
Output power Constant Power switchable
= 2 x 500w RMS into 4 ohm
= 2 x 500wRMS into 8 ohm
Frequency response THD+N <0.02%@1kHz
MainsPower - Internal unit, linear regulated Internally wired to required country voltage
AC mains input 100V to 240V AC@50/60Hz
Power consumption 1600W max
Mains fuse rating: 100-120V AC use T10A 20mm, 220-240V AC use T8A 20mm
28.9"W x 7"H x 21.2", 53 lbs.