A simple live sound setup for ideal for smaller venues and acts.
This live sound package includes an Alesis S-16 16-channel compact mixer, a pair of QSC K10 10" Powered PA Speakers, two Gear One MV1000 Handheld vocal microphones, two Gear One XLR microphone cables (20' each), two Rapco Horizon TRS-TRS cables (20' each). Rounding out this collection is a pair of sturdy Musician's Gear Standard Speaker Stands.
Alesis S-16 Mixer
The Alesis S-16 is a 16-channel mixer that is rugged, surprisingly compact, and bursting with professional features. The S-16 features eight mono and eight stereo input channels. Each mono channel is outfitted with a three-band equalizer with sweepable mid-range, and each stereo channel is equipped with a four-band fixed-frequency EQ, putting precise, sound-shaping control at your fingertips. Ultra low-noise, discrete mic preamps with 48v phantom power and Mute / Alt 3-4 and Solo functions on each channel make the S-16 an easy choice for professional mixing.
QSC K10 10" Powered PA Speakers
Weighing in at only 32 lb. and kicking out an impressive 1,000W of Class D power, the K10 has a 10" woofer; 1-3/4" compression HF driver; control and time-alignment DSP; 2-channel mic/line mixer section; EQ presets for normal or enhanced vocals; DEEP mode for LF extension without a subwoofer; and HP filter for use with a subwoofer. The angled cabinet enables use as main or monitor if you choose to add to your setup later.
Gear One MV1000 Handheld Mics
The Gear One MV1000 dynamic, hand-held vocal microphone is ruggedly built with a crisp, clear presence, and cardioid polar pattern for rear isolation and higher gain before feedback. It comes with a carrying pouch, stand adaptor, and a one-year warranty.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Alesis S-16 / QSC K10 PA Package Features:
- Alesis S-16 mixer (see SKU#H75228)
Ultra-low noise 16-channel, 4-bus mixing console
Eight gold-plated XLR inputs
Four stereo input channels with balanced input jacks
Two stereo Aux returns
Ultra low-noise discrete mic preamps with 48v phantom power
Independent main mix, control room, and headphone outputs
Peak LEDs on each channel
Balanced inputs and balanced main outputs
Pre- and Post-fader Aux routing for external effects and monitoring
Two-track inputs assignable to Main Mix, Phones/Control Room outputs
+4dBu/-10dBV on each stereo channel
Mute/Alt 3-4, Solo function on each channel
12-segment bar-graph meters for precise reading of the output signal
High-quality faders and sealed potentiometers
QSC K10 10" Powered PA Speakers (see SKU#581517)
1,000 watt, efficient and lightweight class-D power module
Lightweight (32 lb.)
Professional appearance and rugged construction
Directivity Matched Transition (DMT) and Intrinsic Correction DSP tuning for accurate, undistorted performance across the entire sound field
GuardRail technology discreetly protects the system from damaging overload
DEEP mode for enhanced low-frequency extension without a subwoofer
Locking IEC power cable
XLR and 1/4" connectors
Phone Mic/Line and Line inputs with Loop-thru connectors and independent level controls.
Phono (RCA) inputs
Three 2-way models—each with coverage pattern optimized to match the LF driver
Front mounted LED may be switched off or indicate "LIMIT" or AC Power On
Dual angle, 35 mm pole socket with Tilt-Direct allows the speaker to be angled down to put the energy on the audience instead of the back wall
1-3/4" voice-coil compression driver
High Pass Filter for use with subwoofers
1,000 watt subwoofer, efficient and light-weight Class D power module
Threaded pole socket for solid, secure pole mounting
Gear One MV1000 Mics (see SKU#H72917)
Rugged construction
Excellent presence and intelligibility
Handsome styling
Professional quality
Also includes:
2 Gear One XLR Microphone Cables - 20' each (see SKU#339877)
2 Rapco Horizon TRS-TRS Cables - 20' each (see SKU#336401)
2 Musician's Gear Standard Speaker Stands (see SKU#451036)
Alesis S-16 / QSC K10 PA Package
One year parts and labor warranty on all keyboards, DAT, and modules.
One year or 1500 hour warranty (whichever comes first) on tape heads.
Custome must register purchase online to receive customer registration number and warranty.
(No warranties are sent with product.)
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
