Flash Deals: New Deals Just AddedShop now »

TCT Series TCT35C 35W Tube Guitar Combo Amp

Item #: 
  • Write a Review

The Albion TCT Series TCT35C 35W Tube Guitar Combo Amp has 2 separate switchable channels, both featuring the same controls per channel. Channel A features the EQ circuit before the gain stages, whils... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat


The Albion TCT Series TCT35C 35W Tube Guitar Combo Amp has 2 separate switchable channels, both featuring the same controls per channel. Channel A features the EQ circuit before the gain stages, whilst Channel B features the EQ after the gain stages.

Both channels feature the capability of running (depending on control settings) from “clean” through “crunch” to “high gain lead”. But due to the different “voicing” provided by the EQ position (and other voicing elements), both channels have an entirely different spectral response and player’s “feel”.

The player himself can choose which he prefers for his particular style and suitability.

There is no fixed Clean or Lead channel that can be the limiting factor on other makes of multi channel guitar amplifiers. This flexibility sets the Albion TCT guitar amplifiers apart from other brands.

The TCT35C amplifier circuit utilizes a combination of technologies to provide optimum performance required for high class consistent playing night after night.
The preamplifier section uses 3 double triode low noise 7025/12AX7/ECC83 valves (tubes) with high speed relay switching for circuit reconfiguration when channel switching.

The input gain itself is a very special proprietary circuit combining a 12AX7 preamp tube and a unique high voltage FET (field effect transistor). This circuit has many benefits that are not readily available with tube only designs, in that the input stage noise (particularly heater hum) is greatly reduced, first stage microphony is vastly reduced, input stage gain and drive capability is increased allowing it to drive the rest of the preamp better, and lastly it imparts a tonality approaching that of a pentode tube, which is good in its own right! All this means is that the input stage will perform better and more reliably by reducing the things you DON’T want from a tube!

A word about the EQ system used on the Albion TCT range of amps. Although the tone controls are based on the time honoured interactive passive system historically used on most guitar amps, our design is somewhat wider ranging than most others. For instance the MIDDLE control has a much wider range than normal and will give a substantial amount of mid boost as well as mid cut. The result of this opens up a whole new range of sound possibilities that we think you will enjoy. For instance using the mid boost capability gives rise to some very sweet singing sustain – great for blues and fusion.

The preamplifier’s twin channel output is then mixed into the FX loop and digital Reverb system. This section is unashamedly solid state as this section is designed to be as transparent as possible in passing all the valve tone of the preamp to the input of the all tube power amplifier section, whilst handling the duties of efficient real world FX loop connection, digital reverb connection, and noise free seamless channel switching.

The TCT35 power amplifier uses a 12AX7/ECC83 phase splitter and 2 off 6L6 output tubes. The 35 watt output power from this configuration allows the output valves to be run at a hotter class of operation for a smooth and warm tone without losing any of the classic 6L6 sound.

The power amp section can be switched between two feedback networks – open loop & closed loop. Open loop gives a raw, open, vintage style to the sound with lots of player feel and tactile response. Closed loop gives a much tighter modern response to the sound and feel.

The output section can also be run at 33% (approx 12 watts) of its total output power for those situations when flat out really is “too loud”!

The TCT35C combo comes complete with one of our own designed and built Albion G1270C 16ohm 12” loudspeakers.

  • All tube construction
  • 2 separate channels with extensive tone-shaping controls
  • Proprietary circuit combining a preamp tube mixed with a unique high voltage FET
  • Wide ranging MIDDLE control
  • Transparent FX loop and digital Reverb system
  • 35 watts RMS output into 8 or 16 ohm impedance loudspeaker load.
  • 4 x 7025/12AX7/ECC83 double triode small signal valves (tubes)
  • 2 x 6L6GC power valves (tubes)
  • Dimensions: 22" (W) x 9-1/4" (H) x 19-2/3" (D)
  • Weight: 51.8 lb.
  • Customer Reviews

Review Snapshot®

by PowerReviews

(based on 2 reviews)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to Top

(1 of 1 customers found this review helpful)


albion tct35


from Mission Viejo, CA

I've had the Albion tct35 for about a year now. First off I was attracted to it's beautiful construction. It's a work of art even before you plug in. I researched it in magazine and internet demos and was immediately intrigued by its bold, warm, thick sound. I had never owned a tube amp before so I thought this was a good amp to choose. I also liked the fact that amp was designed by Steve Grindrod, who has ties with Marshall and Vox. I love the versatility of both the clean and dirty channels. Both channels can easily be navigated through in finding the right sound/feel you need. I have 3 guitars, each with different pickups (EMG, Seymour Duncan, DiMarzio) and each come alive and distinctly different through the Albion. I really like the 33% switch, which still gives you the power but at lower volume levels. My neighbors probably like that too! All in all, I'm very pleased with the Albion and recommend it highly.

Comment on this review

(1 of 3 customers found this review helpful)


Review after the first 24 hours


from Tulsa, OK

Great Amp. Great feature set. A lot of power through the 6L6's. Channel A sounds great clean and B sounds great with distortion. Both channels voicing can be tweaked to your hearts desire. Included is a nice footswitch. The reverb is great. I love the amp after the first 24 hours. I just wanted to get a review out here after buying the amp so others could read. It took some guts to pull the trigger on buying this with very few reviews, but Im glad I did. For the money, you cant get more amp than this. Its loud but completely controllable. The designers didnt leave anything out. No modding needed. Thats the beauty of this amp, you can MOD the sound and voicing with knobs and buttons, not with capacitors and resistors like other amps need to change thier voicing or tonal structure. Thanks to the creators of Albion for giving us so much for a good price compared to other amps with similar features.

Comment on this review

Displaying reviews 1-2

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.