View all items from this brand

The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs). Each channel of the S8 Microphone Splitter provides one direct output and one transformer isolated output from a single microphone, making it the ideal signal splitting solution for dividing mic signals for separate Front-of-House monitor mixes, or for remote recording applications. The direct outputs pass phantom power from the main mixer to the microphones for use with condenser microphones. The S8 includes a ground-lift switch on each isolated output to reduce hum due to ground loops between connected AC-powered units. For versatility the S8 mic splitter also features an attenuator pad switch on each input that can be used to connect preamplified signals to the two microphone-level outputs on each channel. Typical preamplified signals would originate from instrument preamplifiers, mixers, keyboards, etc.

With such an extensive history of making audio processors, ART has consistently set new industry standards and watched competitors follow their innovation and the ART S8 Microphone Splitter is no exception. ART continues to set the bar for high-quality audio products at a reasonable cost to audio enthusiasts of all types.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

ART S8 8-Channel Balanced Mic Splitter Features:

Dimensions: 5.25"H x 19 "W x 8"D (133mm x 483mm x 203mm)
Weight: 12 lbs. (5.4 kg)
Frequency response:
20 Hz to 20K Hz,±0.25 dB @ -15 dBu
3 dB at approximately 165K Hz
THD+Noise:
< 0.26% from 20 Hz to 20K Hz at —15 dBu input
< 0.1% from 45 Hz to 20K Hz at —15 dBu input
Phase Response Input Impedance:
0.002% Typical at 1K Hz,—15 dBu input
Less than 10 degrees at 20K Hz (ref. 1K Hz)
Greater than 1.1K Ohms at 1K Hz
Output Impedance (Typical driving source impedance is 150 Ohms): < 255 Ohms at 1K Hz
Common Mode Rejection:
>=105 dB @ 60 Hz
>=Greater than 80 dB @ 3K Hz
Voltage Insertion Loss: Approximately 2 dB at 1K Hz
Maximum Input Level:
-1.4 dBu at 20 Hz,<=1% THD
+3.5 dBu at 30 Hz, <=1% THD
+9.4 dBu at 50 Hz, <=1% THD

ART S8 8-Channel Balanced Mic Splitter

In general - one year warranty for equalizers, power conditioners, and personal processors.
3 year warranty for TPS, DPS, and studios.
5 year warranty for pro gear.
Check with manufacturer for specific product warranty.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

• Accidental damage protection (new gear only)
• Expedited Repair
• Free Shipping (for returns or repairs)
• 100% Coverage for Commercial Use
• Extended Return Period
• Extended Price Protection
• No Lemon Guarantee
• Free Transfer of Coverage to a new owner
• Repair Costs Covered for up to 3 years from date of purchase
• Repairs Can Be Authorized Toll-Free by Phone or the via the web