Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Damage due to unexpected and unintentional spills, drops and impacts
Damage due to normal wear and tear
Damage caused by lightning/power surge
Damage due to dust, internal heat, humidity, heavy usage
No Lemon Policy on merchandise over $200- if it fails for the same reason 3 times, it is replaced on the 4th breakdown
Complete refund in the event of failure or substandard performance on merchandise under $200 (Gift Certificate sent for the full price plus applicable sales tax paid)
Manufacturer's Specs Coverage -- The product does not need to fail to be covered. If the product does not perform as it did the first day you bought it, we will repair or replace it so that it does
Free shipping to and from repair facility
Plans are transferable in the event merchandise is sold
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
The ART HeadAmp6 is a fully-featured, 6-channel stereo headphone amplifier that includes six auxiliary inputs to allow separate "more-me" mixes on each headphone channel. Each output channel has a dual function Balance Control which will pan between the left & right input of the main signal bus, or vary the mix between the main stereo signal bus and the auxiliary input for that respective channel.
Each output channel on the ART HeadAmp6 headphone amp includes one front- and two rear-panel stereo 1/4" TRS headphone jacks for ease of installation and quick patching capability. It has Mono, Mute L, and Mute R select buttons, and on each channel you can select between four operating modes—Stereo, Mono Left, Mono Right, and Mono Both (Left & Right)—for versatile monitoring solutions. Independent output level controls on each channel of the 6-channel headphone amp personalize monitoring levels.
The ART HeadAmp6's input options include XLR and 1/4-inch TRS balanced inputs with matching Thru jacks for bridging multiple headphone amps. An additional front-panel stereo 1/4" TRS Direct In jack for quick patch override of the rear panel inputs is included for quick insertion of any stereo source. Master Volume control sets the main signal bus level. The headphone amp's eight-segment precision LED level metering on the main bus and four-segment indicators on each output channel provide visual feedback of the signal level at all key points.
Audio Utilities Series Audio Utilities by Applied Research and Technology are audio devices that have been designed and engineered to exceed high standards for audio performance and functionality. These innovative, high-quality components make the ART HeadAmp6 headphone amplifier perfect for virtually any audio application where precision frequency tailoring, reliable performance, and rugged design are of the utmost importance. ART Audio Utilities deliver extremely precise and powerful flexibility, with quality features and reliable design criteria necessary for top-level audio performance.
ART HeadAmp6 Headphone Amplifier
Features:
Six independent high-power headphone amplifier channels Dual function balance/mix control per channel Front panel stereo aux input for each channel Multiple monitoring settings per channel Individual output level control per channel Precision four-segment LED metering per channel Master volume control w/ eight-segment LED metering Front panel direct in jack One front- and two rear-mounted headphone jacks per channel Connects and drives up to 18 headphones simultaneously XLR and 1/4" main inputs and outputs Parallel main outputs for multiple unit use
ART HeadAmp6 Headphone Amplifier
Specifications:
Input Connections: XLR-F balanced (2), 1/4" balanced (9) Output Connections: XLR-M balanced (2), 1/4" balanced (2), 1/4" stereo headphone (18) Input Impedance: 40KO Main, 10KO Direct, 15KO Aux In Output impedance: <12Os Headphones Maximum input level: +21dBu (all inputs) Maximum output level: 150mW (600O headphones), 500mW (32O headphones), 150mW (8O headphones) Maximum gain: 22dB Signal-to-Noise ratio: >90dB typical THD: <.01% typical Dynamic range: >101dB typical CMRR: >40dB Phase shift: <10 degrees, 20Hz - 20kHz Power requirements: 120VAC / 50-60Hz, or 230VAC / 50 Hz, 15 Watts Dimensions: (HxWxD) 1.75" x 19" x 6", 44.5mm x 483mm x 152mm Weight: 5.3lb. (2.4kg)
In general - one year warranty for equalizers, power conditioners, and personal processors.
3 year warranty for TPS, DPS, and studios.
5 year warranty for pro gear.
Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
Accidental damage protection (new gear only)
Expedited Repair
Free Shipping (for returns or repairs)
100% Coverage for Commercial Use
Extended Return Period
Extended Price Protection
No Lemon Guarantee
Free Transfer of Coverage to a new owner
Repair Costs Covered for up to 3 years from date of purchase
Repairs Can Be Authorized Toll-Free by Phone or the via the web
I considered both the HeadAmp6 and the HeadAmp6 Pro. I ultimately bought this one because it has its individual aux ins on the front instead of the back, which I consider handier for occasional "more me" mix requests. The Pro model has a few more meter segments as well as separate eq on each amp. Having eq sounds tempting, but I'm afraid that could just be a can of worms - it's enough of a challenge just getting levels and mixes right for each band member.
I've had the HeadAmp6 for a couple weeks now and so far I'm lovin' it! Seems to have ample power to cleanly drive headphones to levels well beyond what any human would actually desire.
My only quibble: The balance knob on channel 1 was mounted just a hair counter-clockwise so that when set at the center detent, the knob marking doeesn't perfectly align with the panel marking. I can live with it, but my OCD will ensure that I always notice this flaw every time I use it.
Overall - good quality and great value for the $150 price!
2
of
2
people found this review helpful.
Was this review helpful?
Thank You for rating this review!
You must be logged in to write a review. Please click here to login.
Browse similar items:
Product Details
Customer reviews
Price
You are currently viewing the Printable Version of this page. Click here to return
to the Regular Version.
866-498-7882
Available in Stores
For your convenience, our online inventory has been expanded to include items in
our retail locations. Some items may be fulfilled from Guitar Center retail stores*.
Items will be inspected to ensure the store has the product you want, in the condition
you expect. If not, a store manager will contact you by phone or email within one
hour.
*Select items are available for in store pick-up only
(Based on 
Based on 
